Quick answer
The Herm Sprenger Fur Saver chain is a premium training tool that works best when sized correctly and used with a gentle hand. Follow these steps to avoid pinching fur or causing discomfort.
Why size matters for the Fur Saver design
The Fur Saver style has a smooth, rounded link that reduces coat pulling, but it only works when the collar fits snugly without being tight. A collar that is too loose can slide and rub fur; one that is too tight can restrict breathing or cause pressure sores.
Herm Sprenger collars are measured from ring end to ring end. Always measure your dog's neck with a soft tape and add 2 inches for the correct fit.
How to safely use the Herm Sprenger Fur Saver
- Measure and select the correct size: Use a soft measuring tape around the middle of your dog's neck. Add 2 inches to that measurement. The Fur Saver is sold by overall length from ring end to ring end, so confirm that number matches your tape result. A collar that is too short will not close; one that is too long will slide and pinch fur.
- Fit the collar properly: Place the collar high on the neck, just behind the ears. It should be snug enough that you can fit two fingers between the chain and the neck. Check that the rings lie flat and do not twist. If the collar rotates on its own, it is too loose. Tighten one link or size down.
- Use for training, not all-day wear: The Fur Saver is a training tool, not a flat collar for everyday use. Use it during obedience sessions, leash walks, or behavior correction. Remove it after the session to avoid pressure marks. Never leave a chain collar on an unsupervised dog—it can catch on objects or cause choking.
- Check for wear and clean regularly: Inspect the links and rings for rust, sharp edges, or bent metal after each use. Rinse with fresh water if the collar gets muddy or salty, then dry it completely. Stainless steel resists corrosion but is not maintenance-free. A damaged link can break during a correction. Replace the collar immediately if you see any deformation.
Product details
-
4.0 mm Stainless Steel Herm Sprenger Fur Saver***: The Herm Sprenger Fur Saver is a 4.0 mm stainless steel chain with 1.5-inch link collars, designed to alleviate pulling of long-haired coats. The 4.0 mm thickness makes it durable for training while the smooth links prevent fur snagging, so you can use it on double-coated or long-haired breeds without matting.
4.0 mm Stainless Steel Herm Sprenger Fur Saver***
