Why a Dedicated UV LED Lamp Matters for Gel Wraps
UV Gel Nail Wraps need a proper UV LED lamp to cure and last. The Colour Flash UV LED 6 Lamp is designed specifically for this purpose, providing the correct wavelength and power to harden the wraps. Without a compatible lamp, the wraps may not adhere properly or could peel prematurely.
The lamp delivers at least 48 watts of power, which is the minimum requirement for curing UV gel nail wraps effectively. Using a lower-wattage lamp or a standard UV lamp meant for other products may not achieve full curing, leading to reduced wear time.
What the UV LED 6 Lamp Confirms
-
UV LED Lampe: The Colour Flash UV LED 6 Lamp cures UV Gel Nail Wraps. Follow the product instructions for the required curing time. This short curing time makes the process quick and convenient, allowing you to finish a full manicure in minutes.
UV LED Lampe
-
UV LED Lampe: The lamp requires at least 48 watts of power for curing UV Gel Nail Wraps. Using a lamp with lower wattage may not fully cure the wraps, compromising adhesion and durability.
-
UV LED Lampe: With proper curing, UV Gel Nail Wraps can last up to 3 weeks. A full cure ensures the wraps stay intact through daily activities, offering salon-quality wear at home.
How to Cure UV Gel Nail Wraps with the UV LED 6 Lamp
Follow these steps to ensure your UV Gel Nail Wraps cure properly and last as long as possible.
- Prepare the nail: Clean and dry the nail surface. Push back cuticles and gently buff the nail to remove shine. Wipe with alcohol or a nail cleanser to remove dust and oils.
- Apply the wrap: Select the correct size wrap for each nail. Peel the backing and press the wrap onto the nail, smoothing out any bubbles or wrinkles. File off any excess wrap at the free edge.
- Cure under the lamp: Place the hand under the Colour Flash UV LED 6 Lamp and cure according to the product instructions. Ensure all nails are fully exposed to the light. Repeat for the other hand.
- Finish and seal: Optionally apply a UV top coat for extra shine and protection, then cure again as directed by the product instructions. Wipe off any tacky residue with alcohol if needed.
Compatibility Note: Not for 4in1 UV Nail Polishes
The Colour Flash UV LED 6 Lamp is not suitable for Colour Flash's 4in1 UV nail polishes. Those polishes require a lamp with 48 watts or more, but the UV LED 6 Lamp is specifically designed for curing UV Gel Nail Wraps. Always check the product instructions to ensure you use the correct lamp for each product type.
If you are using UV Gel Nail Wraps, this lamp is the correct companion for achieving a durable, long-lasting manicure.



