Quick Answer
Assemble the Walkin' Wheels 4-Wheel Medium by laying out all parts, attaching the frame and wheels, then adjusting the saddle and straps to your dog's measurements before the first walk.
Why Proper Assembly Matters
A correctly assembled wheelchair ensures your dog's weight is evenly supported and prevents sores or wobbling. The Walkin' Wheels Full Support 4-Wheel Medium is designed for dogs between 26 and 49 lbs, so a secure fit is essential.
Take your time on the first assembly. Most issues come from loose bolts or misaligned wheels, which are easy to fix if you follow the steps carefully.
Tools and Preparation
You'll need the included Allen wrench and a flat surface. Have your dog's measurements (length, height, and girth) handy for adjusting the frame.
If you don't have the exact measurements, consult the sizing guide before you begin—this will save you from re-adjusting later.
Step-by-Step Assembly
- Unbox and inventory all parts: Lay out every component: frame rails, crossbars, wheels, saddle, straps, and hardware. Check that nothing is missing before you begin. Missing a bolt or spacer is a common issue—contact support if anything is absent.
- Attach the rear wheels: Slide the rear wheels onto the axle and secure them with the quick-release pins. Ensure the wheels spin freely and the pins are fully engaged. A loose pin can cause wheel wobble—double-check before moving on.
- Connect the front wheel assembly: Attach the front wheel fork to the frame using the provided bolts. Tighten just enough to allow steering, but not so loose that it flops. Over-tightening restricts turning; you want smooth movement.
- Adjust the frame length and height: Loosen the frame clamps and extend or retract the rails to match your dog's length and shoulder height. Tighten all clamps securely. Measure twice—an incorrect frame length can cause chafing or poor weight distribution.
- Fit the saddle and straps: Position the saddle under your dog's belly and adjust the straps so they are snug but not tight. The saddle should support the abdomen without pressing on the spine. You should be able to fit two fingers between the strap and your dog—any tighter restricts breathing.
- Do a trial walk: Let your dog walk a few steps indoors on a non-slip surface. Watch for any dragging, tilting, or signs of discomfort, then adjust the straps or frame as needed. If your dog seems unsteady, re-check wheel alignment and frame level.
Product Facts
-
Walkin' Wheels Full Support/4-Wheel MEDIUM: The Walkin' Wheels Medium Quad provides full body support for pets between 26 and 49 lbs, with both front and hind leg support. This means the 4-wheel setup is ideal for dogs needing balanced mobility during recovery, and proper assembly ensures that support is evenly distributed.
Walkin' Wheels Full Support/4-Wheel MEDIUM
