Quick Answer
New Hyper Mat 100ct Purple sleeves often stick due to static cling and residual manufacturing oils. A brief shuffle-and-air session usually resolves it.
Why Sticking Happens
Fresh from the pack, Hyper Mat sleeves have a smooth, low-gloss surface that can trap static electricity. Combined with a thin film of production residue, this creates temporary adhesion between cards. It's not a defect—most matte sleeves behave this way until broken in.
When Sticking Signals a Problem
If sticking persists after several rounds of play and the above fix, check for moisture or damage. Humid environments can cause sleeves to cling more. If sleeves remain sticky after drying, the batch may have a coating issue—consider replacement.
Diagnosis and Fix
- Symptom: Cards stick together when you try to shuffle or draw from a freshly opened pack of Hyper Mat 100ct Purple sleeves.
- Likely Cause: Static cling and trace manufacturing residue on the smooth matte surface. This is temporary and normal for new sleeves.
- Corrective Action: Separate the sleeves into two piles. Riffle shuffle them together 10-15 times, then fan the deck and let it sit for 5 minutes. Repeat once more if needed. If sticking stops after this, your sleeves are ready for play.
- When to Stop: If sleeves remain sticky after two shuffle-and-air cycles and the environment is dry, the coating may be defective. Stop using them and contact the retailer for a replacement. Do not use silicone sprays or oils—they will ruin the sleeve texture and may damage cards.
Product Facts
-
Hyper Mat 100ct - Purple: Hyper Mat 100ct Purple sleeves have a low gloss, textured back and are .12mm thick. The matte texture reduces glare but can create more static cling when new, which is why a quick break-in is recommended.
Hyper Mat 100ct - Purple
