Quick answer
A hob guard that keeps falling off is usually due to poor surface preparation, an incompatible size, or weak adhesive. Here’s how to diagnose and fix the problem.
Why surface preparation matters
Hob guards rely on strong adhesion to stay in place. If the surface is greasy, dusty, or uneven, the adhesive won't bond properly. Even a small amount of cooking residue can weaken the grip over time.
Clean the hob surface thoroughly with a degreaser and let it dry completely before applying the guard. Avoid using oil-based cleaners that can leave a film.
Size and fit issues
If your hob guard is too small or too large for your stove, it may not sit flat or may be pushed off by the heat or movement. Measure your hob width carefully and compare it to the guard's adjustable range.
For example, the Fred Safety Stove & Hob Guard fits hobs from 57 to 90 cm, covering most standard sizes. If your hob falls outside this range, the guard may not stay secure.
Diagnosis and fix
- Symptom: The hob guard falls off within a few hours or days of installation.
- Likely cause: Surface not clean enough, guard size incompatible, or adhesive too weak for the surface material.
- Corrective action: Remove the guard, clean the hob with a degreaser, dry thoroughly, and reapply using the provided adhesive. If it still fails, check the size compatibility. If the guard still doesn't stay after a clean reapplication, it may not be the right fit for your hob.
- Stop or choose another option: If your hob is outside the adjustable range (e.g., under 57 cm or over 90 cm), or if the surface is textured or non-stick, the adhesive guard may never hold. Consider a different type of hob guard or a permanent installation method.
Product facts
-
PREORDER: Fred Safety Stove & Hob Guard: The Fred Safety Stove & Hob Guard is suitable for all electric, gas, ceramic and induction hobs extending from 57 – 90cm. If your hob is within this range, the guard should fit securely; if not, you may need a different solution.
PREORDER: Fred Safety Stove & Hob Guard
