Quick answer
To set up the camera on your PETKIT YumShare Dual-hopper 2 Feeder, install the feeder, open the PETKIT app, pair the device, then tap the camera icon to adjust the angle and enable 24/7 monitoring.
Why the camera angle matters
The built-in AI camera uses facial recognition to identify each cat and track meals. A poor angle can miss the feeding zone or make facial recognition less reliable. Before you start, place the feeder on a stable, level surface where the camera has a clear view of the bowl area.
Camera setup steps
- Install and power the feeder: Place the feeder on a flat surface near a power outlet. Insert the batteries (optional) and plug in the power adapter. Wait for the LED to blink, indicating the device is in pairing mode. Common mistake: Placing the feeder too close to a wall can block the camera's field of view. Leave at least 6 inches of clearance in front.
- Connect to the PETKIT app: Open the PETKIT app on your phone. Tap "Add Device" and select "YumShare Dual-hopper 2". Follow the on-screen instructions to connect the feeder to your Wi-Fi network (2.4 GHz only). Checkpoint: If the app doesn't find the device, press and hold the reset button for 5 seconds until the LED flashes rapidly.
- Adjust the camera angle: Once paired, tap the camera icon in the app. You'll see a live preview. Manually tilt the camera lens (located on the top front of the feeder) up or down until the bowl area is centered in the frame. Tighten the lens gently to hold the position. Common mistake: Over-tightening the lens can crack the plastic. Stop when you feel resistance.
- Enable 24/7 monitoring and facial recognition: In the app's camera settings, toggle on "24/7 Monitoring" and "Facial Recognition". The feeder will then record all meals and identify each cat by its face. You can view snapshots and meal logs from the app's timeline. Checkpoint: Facial recognition works best when cats are within 1-3 feet of the camera. If recognition fails, move the feeder closer to the usual feeding spot.
Product facts
-
PETKIT YumShare Dual-hopper 2 Automatic Feeder with Camera: The PETKIT YumShare Dual-hopper 2 Automatic Feeder with Camera has facial recognition that identifies every cat in multi-pet homes. This means you can monitor which cat ate how much, even if you have multiple pets sharing the feeder.
PETKIT YumShare Dual-hopper 2 Automatic Feeder with Camera
