Quick answer
The 30MS x iDOLM@STER Option Body Parts Alpha Sisters Phantasm 1 (Color A) lets you swap arms, legs, and hands onto compatible 30MS figures for a fresh look. Follow these steps to attach, paint, and pose them without breaking the clear parts.
Why these parts work for customization
The set includes asymmetrical arm and leg parts designed by Fumikane Shimada, with clear accents that catch light differently. Because they are sold separately from the figure, you can mix and match with other 30MS bodies or even spare parts from different kits. The clear plastic is more brittle than standard ABS, so gentle handling during assembly is key.
Step-by-step customization process
- 1. Prepare the figure and parts: Remove the existing arms and legs from your 30MS figure (e.g., Sakuragi Mano) by gently twisting at the ball joints. Inspect the Option Body Parts for flash or nubs on the clear sections; trim with a sharp nipper and sand with 600-grit sponge. Common mistake: pulling straight off can snap the peg. Always twist gently.
- 2. Dry-fit before painting: Snap the new arms, legs, and hands onto the figure without glue. Check that the joints move freely and the clear parts align with the body. If a peg is too tight, scrape a thin layer of plastic with a hobby knife rather than forcing it. Forcing a tight joint can crack the clear plastic. Dry-fit first to avoid damage.
- 3. Paint or topcoat (optional): If you want to match the Color A scheme or add shading, mask the clear parts with tape and spray a thin layer of acrylic paint (e.g., Mr. Color) on the opaque sections. Let each coat dry 15 minutes before reassembling. Checkpoint: avoid painting the ball joints—paint will thicken them and cause stiffness.
- 4. Final assembly and posing: Once paint is dry, reattach the parts. Pose the figure carefully, supporting the clear parts when bending elbows or knees. Store in a dust-free case to keep the clear surfaces scratch-free. Clear parts are more prone to scratching than standard plastic. Handle by the opaque sections when possible.
Product details
-
30MS x THE iDOLM@STER - Option Body Parts Alpha Sisters Phantasm 1 (Color A): Includes arms, legs, and hand parts to match the original costume; features clear parts and an asymmetrical design by Fumikane Shimada. The clear parts add a translucent effect that stands out on the shelf, but they require careful trimming and sanding to avoid stress marks.
30MS x THE iDOLM@STER - Option Body Parts Alpha Sisters Phantasm 1 (Color A)
