Quick Answer

To attach a softbox to an Elinchrom mount, use a compatible Elinchrom speed ring adapter, align the rods, and secure the ring onto the strobe with a firm twist.

Why the Right Speed Ring Matters

Not all speed rings are universal. Using the wrong adapter can lead to a loose fit or even damage your strobe's mount. An Elinchrom-specific speed ring ensures compatibility with your light and softbox rods.

The Photographic Softbox Soft Box Speed Ring Speedring Adapter for Elinchrom is designed to fit standard rectangular and octagon softboxes, with an outer diameter of 7 5/8" (19mm) and fits 1/4" (6mm-7mm) rods. This makes it a reliable choice for most Elinchrom strobes.

Step-by-Step Attachment Process

  1. Prepare Your Softbox and Speed Ring: Lay the softbox on a flat surface and insert the rods into the speed ring's holes. Ensure each rod clicks or fits snugly into its slot. Check that all rods are fully seated before moving to the next step.
  2. Position the Speed Ring on the Strobe: Align the speed ring's mounting plate with the Elinchrom mount on your strobe. The ring should sit flush against the light. If the ring doesn't sit flat, recheck the rod alignment—do not force it.
  3. Twist to Lock the Speed Ring: Rotate the speed ring clockwise (or as indicated by the mount) until it locks into place. You should feel a positive click or resistance. A proper lock prevents the softbox from drooping or detaching during use.
  4. Attach the Softbox Fabric and Diffusers: Once the speed ring is secure, stretch the softbox fabric over the rods and attach the inner and outer diffusers as needed. Ensure the fabric is evenly tensioned to avoid wrinkles that affect light quality.

Product Facts