Why Sizing Matters for a Backpack Cover
A backpack cover that's too small won't fully protect your gear; one that's too large can flap, catch on branches, or shift during movement. Getting the size right means your cover stays secure, your pack stays dry, and you don't waste time adjusting it on the trail.
Savotta's backpack covers are designed for specific litre ranges, but real fit also depends on pack shape, external attachments, and how you use the cover. This guide walks you through the key measurements and considerations so you can choose with confidence.
How to Measure Your Backpack for a Cover
Start by measuring your pack's height and width when it's fully loaded, as you would carry it. For a cover that fits over the main body, measure from the top of the pack (excluding the top lid or extension collar) to the bottom. Then measure the widest point across the front.
Compare those dimensions to the cover's flat-laid measurements. For example, the Backpack Camo Scrim (15-30L) measures 75 cm wide and 85 cm tall when laid flat. That gives you a clear reference: if your pack's height and width fit within those numbers, the scrim will cover it. If your pack is taller or wider, you'll need a larger cover size.
Backpack Camo Scrim 15-30L: Sizing Evidence
-
Backpack camo scrim, 15-30L: When laid out completely flat this cover is 75 cm wide and 85 cm tall. These flat dimensions let you directly compare your pack's height and width. If your pack fits within 75x85 cm, this scrim will work.
Backpack camo scrim, 15-30L
-
Backpack camo scrim, 15-30L: Laser cut 3D camouflage scrim cover for 15-30 litre backpacks. The litre range is a starting point, but shape and external gear can affect fit. Always check the flat dimensions for a precise match.
-
Backpack camo scrim, 15-30L: Examples of our packs and setups that this 15-30L scrim fits: Hatka 12L, Kahakka 15L, Kahakka 25L, Jääkäri M (without extra gear). These real pack examples show that the 15-30L scrim can fit packs as small as 12L and as large as 25L, depending on shape and external attachments.
What to Do If the Cover Is Too Big
If the cover is slightly larger than your pack, you can often adjust it to fit more snugly. The Backpack Camo Scrim 15-30L, for instance, can be trimmed along the edges to downsize it. The laser-cut 500D Cordura is strong enough to cut, but be careful: if you cut too much and ruin the cover, it's not covered by warranty. Keep the edges whole so you retain the holes for the retention cord.
The elastic cord around the perimeter also lets you cinch the cover tight. Thread the cord through the laser-cut patterns (alternating over and under), then attach the cord lock and tie the ends. This tension pulls the cover close to the pack, reducing excess material.
Securing the Cover to Your Pack
Once the cover is the right size, you need to keep it in place. The scrim's design lets you loop side compression straps, shoulder straps, or other suitable bits through the scrim or around the elastic retention cord. This works even if your pack doesn't have dedicated attachment points.
For packs with a frame or extra gear on the outside, check that the cover can still stretch over everything without tearing. The elastic cord and the scrim's open weave give some flexibility, but extreme loads may require a larger cover.
Choosing a Color for Your Environment
Savotta offers the camo scrim in a multitude of colours to suit different environments. All colour options offer good NIR (near-infrared) performance, which is important if you need to avoid detection by night-vision equipment. The scrim's 3D design also lets you add natural vegetation to improve camouflage further.
If you have a brown pack and add a green scrim, you get a brown-green pattern. You can use the colour of your pack to create a custom camouflage pattern. Just remember that the scrim is laser-cut, so white variants may show burn marks – that's a natural part of the manufacturing process, not a defect.
What the Supplied Information Does Not Settle
The evidence confirms fit for specific pack models and litre ranges, but it doesn't guarantee compatibility with every pack on the market. Packs with unusual shapes, large external pouches, or frames may need a different size or a custom solution. Also, the scrim's flat dimensions (75x85 cm) are a guide, not a hard limit – you can trim it, but you can't add material.
If your pack falls outside the 15-30L range or has a very tall profile, consider a larger cover. Always measure your loaded pack and compare it to the cover's dimensions before buying.



