Quick answer
The BE@RBRICK OG Slick 1000% stands about 700mm tall and needs a stable, dust-free spot. Use a sturdy shelf or display case, keep it out of direct sunlight, and dust it gently with a soft cloth.
Why 1000% size matters for display
At roughly 700mm (about 27.5 inches), the BE@RBRICK OG Slick 1000% is a substantial piece that demands dedicated space. Unlike smaller 400% or 100% figures, this size can't sit on a crowded shelf without looking cramped or risking damage from nearby items. Plan for a clear area where the figure can be the focal point.
Trade-off: open shelf vs. display case
An open shelf makes the figure easy to see from across the room, but dust collects quickly on the flat surfaces and joints. A display case with a glass door keeps dust away and reduces cleaning frequency, but it can limit viewing angles and add cost. Choose based on your room's dust level and how often you want to clean.
5 steps to display your BE@RBRICK OG Slick 1000%
- 1. Choose a stable, level surface: Place the figure on a sturdy shelf or cabinet that can hold at least 5 kg. Avoid surfaces that wobble or are near edges where the figure could be knocked off. A common mistake is using a floating shelf without enough bracket support. Check the weight rating before placing the figure.
- 2. Keep away from direct sunlight: UV rays can fade the OG Slick design over time, especially on the painted areas. Position the figure where sunlight never hits it directly, or use UV-filtering glass if using a display case. Even indirect sunlight through a window can cause gradual fading. Rotate the figure periodically if light exposure is unavoidable.
- 3. Dust with a soft, dry cloth: Use a microfiber cloth to gently wipe the surface every two weeks. For crevices around the joints, use a soft brush or compressed air. Avoid liquid cleaners that could damage the paint. Never use paper towels or abrasive cloths—they can scratch the vinyl finish.
- 4. Manage humidity and temperature: Keep the figure in a room with stable humidity (40-60%) and temperature (60-75°F). Extreme conditions can cause vinyl to warp or become brittle over time. Avoid basements, attics, or rooms with frequent temperature swings.
- 5. Secure the figure if in a high-traffic area: If the figure is displayed in a hallway or room where people walk by, use a clear acrylic stand or museum putty on the base to prevent tipping. This is especially important if you have pets or small children. The 1000% size has a larger footprint, so it's less likely to tip than smaller figures, but still vulnerable to bumps.
Product details
-
BE@RBRICK OG Slick 1000%: Total height is approximately 700mm. This large size requires a shelf or cabinet with at least 750mm of vertical clearance and a solid base that can support its weight without tipping.
BE@RBRICK OG Slick 1000%
