Quick answer

The Carrera Blue Jumper front bumper (part 162055) is a direct-fit spare part that replaces the original bumper with basic hand tools. Follow the steps below to install it correctly and avoid common mistakes.

What you need before starting

The Blue Jumper front bumper is a single plastic part designed to clip or screw into the front chassis. No special skills are required, but having the right tools and a clean workspace makes the job easier. The bumper is not pre-painted, so if you want a color match, plan to paint it before installation.

Installation steps

  1. Remove the old bumper: Use a small Phillips screwdriver to remove the screws holding the old bumper to the front chassis. Gently pull the bumper away from the car. If it is stuck, use a flat tool to pry it loose, but avoid bending the mounting tabs. Common mistake: Forgetting to remove the screws before prying can break the chassis tabs.
  2. Check the new bumper alignment: Hold the new bumper (part 162055) against the front of the Blue Jumper. The mounting holes should line up with the chassis holes without force. If they do not, double-check that you have the correct part for your model. Checkpoint: If the holes do not align, do not force the screws — you may have the wrong version.
  3. Secure the bumper: Insert and tighten the screws evenly. Do not overtighten, as plastic threads can strip. Use a hand screwdriver, not a power tool, to feel the resistance. Common mistake: Overtightening can strip the plastic threads, making the bumper loose.
  4. Test the fit: Gently push on the bumper from different angles to ensure it is firmly attached. The bumper should not wobble or move. If it does, check that all screws are snug and the tabs are fully seated. Checkpoint: A loose bumper can catch on obstacles and pull off during driving.

Parts and tools

  • 1 front bumper for Blue Jumper (162055): This is a single front bumper replacement part for the Carrera Blue Jumper, listed under part number 162055. It is the exact OEM part, so you do not need to modify the chassis or buy additional adapters.

    1 front bumper for Blue Jumper (162055)

    1 front bumper for Blue Jumper (162055)