Quick Answer

Assemble the Megami Device Sol Raptor by preparing parts, building the inner frame, attaching armor and weapons, and applying decals. Avoid common mistakes like forcing tight joints or skipping sprue cleanup.

Why Preparation Matters for This Kit

The Sol Raptor is a detailed plastic model kit that requires careful assembly of small, precision parts. Rushing or skipping preparation steps can lead to loose joints, visible nub marks, or misaligned armor pieces. Taking time to clean nubs and test-fit parts before snapping them together saves frustration later.

Assembly Steps for Megami Device Sol Raptor

  1. 1. Prepare Your Workspace and Tools: Lay out all runners and check the manual. Use side cutters to remove parts from sprues, leaving a small nub, then sand or file it flush. Have a hobby knife, tweezers, and a soft mat ready. Clean nubs prevent visible marks and ensure parts fit snugly.
  2. 2. Build the Inner Frame (Machinika Body): Assemble the torso, arms, and legs according to the manual. The polycaps (soft plastic joints) should snap in firmly but not be forced. Test the range of motion on each joint before adding armor. If a joint feels too tight, gently sand the peg; if too loose, apply a thin layer of clear nail polish to thicken it.
  3. 3. Attach the Armor and Face Parts: Snap on the chest, shoulder, and leg armor pieces. Choose between the standard and optional face plates. Ensure the armor clicks into place without gaps—do not force it if it does not align. Align the armor tabs with the frame slots before pressing; forcing can break the thin plastic tabs.
  4. 4. Assemble and Equip the Weapons: Build the included weapon set (sword and gun). Attach them to the hands or mounting points on the armor. The hands have small pegs that fit into weapon handles; use tweezers for a secure grip. If the weapon handle hole is too small, carefully ream it with a hobby knife tip.
  5. 5. Apply Decals and Final Pose: Use tweezers to place the included decals on the armor and face. Seal them with a topcoat if desired. Pose the model by adjusting the joints—support heavy weapons with the base stand. Decals are fragile; handle them by the edge and avoid repositioning once placed.

About the Kit

  • MEGAMI DEVICE SOL RAPTOR: The Megami Device series combines Bishoujo-style characters with heavy weapons and armor, featuring the "machinika" body designed by Masaki Apsy. This means the Sol Raptor has a humanoid inner frame with interchangeable parts, so you can customize pose and equipment without altering the core build.

    MEGAMI DEVICE SOL RAPTOR

    MEGAMI DEVICE SOL RAPTOR