Quick answer
Apply Corepad Grips to your Lamzu Atlantis by cleaning the mouse surface, aligning the grip tape precisely, and pressing firmly. Replace every 3-5 months to prevent adhesive residue.
Why replace grips regularly
Corepad recommends replacing the grips every 3-5 months. Waiting longer can make removal harder and leave sticky residue on your Lamzu Atlantis. Setting a calendar reminder helps you stay on schedule.
Installation steps
- 1. Clean the mouse surface: Wipe the Lamzu Atlantis shell with isopropyl alcohol and a lint-free cloth. Let it dry completely for 2 minutes. Skipping this step can cause the grip to peel off early.
- 2. Align the grip tape: Peel the backing from one end of the Corepad Grip. Line it up with the front edge of the mouse and slowly lay it down, smoothing as you go. Check alignment before pressing; repositioning once stuck can stretch the material.
- 3. Press and seal: Firmly press the grip from the center outward using your thumb or a soft cloth. Pay extra attention to curved areas. Air bubbles trapped under the grip create weak spots that lift over time.
- 4. Let it cure: Wait at least 12 hours before heavy use. The adhesive needs time to bond fully. Using the mouse too soon may shift the grip and reduce adhesion.
- 5. Replace on schedule: Set a reminder to change the grips every 3-5 months. Warm the old grip with a hairdryer on low heat to ease removal. Old grips left too long can leave sticky residue that requires solvent to clean.
Product facts
-
Corepad Grips - Lamzu Atlantis: Corepad recommends replacing the grips every 3-5 months to avoid adhesive issues during removal. Following this schedule prevents stubborn residue and keeps your Lamzu Atlantis clean between grip changes.
Corepad Grips - Lamzu Atlantis
