Quick answer

To install the EZ Glide OG Fret Button Pack Blues Edition, you need a Phillips head screwdriver and a Torx head screwdriver (not included). Remove the fret neck from your CRKD OG-style controller, unscrew the back plate, swap each button, and reassemble. The whole job takes about 15–20 minutes and requires no soldering.

What you need before you start

The Blues Edition pack includes five precision-molded buttons with a matte EZ Glide finish. Installation requires both a Phillips head and a Torx head screwdriver; neither is included. Work on a clean, well-lit surface and keep screws in a small dish so they don't roll away.

  • Phillips head screwdriver
  • Torx head screwdriver (size not specified—check your controller's screws)
  • Small container for screws
  • The EZ Glide OG Fret Button Pack - Blues Edition

Step-by-step installation

Follow these steps in order. Each step includes a checkpoint or a common mistake to avoid.

Common mistakes and how to avoid them

Most problems come from rushing or using the wrong tool. Forcing a screw can strip the head, and mixing up button positions can cause uneven feel. If a button doesn't sit flush, stop and check orientation before tightening.

After installation: testing and care

Once reassembled, test each fret button for smooth travel and responsiveness. The matte EZ Glide finish is designed for smooth play, but keep the buttons clean with a dry microfiber cloth to maintain that feel. Avoid solvents, which can damage the finish.

Installation steps

  1. Power down and detach the fret neck: Turn off your console or PC and unplug the controller. If your CRKD OG-style guitar has a detachable neck, press the release button and slide it off. If not, skip to the next step. Checkpoint: the neck should come off with light pressure—never force it.
  2. Remove the back plate screws: Using the correct screwdriver (Phillips or Torx, depending on your model), remove all screws from the back of the fret neck. Keep them in a container. Common mistake: using a worn or wrong-sized driver and stripping a screw head.
  3. Lift the back plate and expose the buttons: Gently pry the back plate away. Some models may have clips; work slowly around the edges. Set the plate aside. Checkpoint: if the plate resists, check for a hidden screw under a sticker or rubber pad.
  4. Remove the original fret buttons: Each button is held by a plastic retainer or sits in a slot. Note the orientation of each button as you remove it—photos help. Common mistake: mixing up button positions, which can cause uneven feel.
  5. Insert the Blues Edition buttons: Place each new button into its slot, ensuring the matte EZ Glide surface faces the player and any tabs align with the slots. Checkpoint: buttons should sit flush without force. If not, rotate 180 degrees and retry.
  6. Reassemble and test: Replace the back plate and screws. Do not overtighten—snug is enough. Reattach the neck, power on, and press each fret to confirm responsive input. Next step: if a button feels sticky, reopen and check for misalignment.

Product facts

  • EZ Glide OG Fret Button Pack - Blues Edition: Precision molded for a seamless fit, each button features a matte EZ Glide finish for smooth, responsive play, now with a fresh customizable aesthetic. The molded shape and matte finish mean the buttons drop in without modification and give a consistent, non-slip feel during fast passages.
  • EZ Glide OG Fret Button Pack - Blues Edition: Installation requires a Phillips head screwdriver and a Torx head screwdriver. Tools are not included. You'll need to supply your own tools; without them, you can't complete the swap.