Quick answer
To apply a Strider 12 Sport decal set, clean the frame thoroughly, position the decals dry first, then wet-apply or peel-and-stick carefully to avoid bubbles.
Why replace or customize decals?
Over time, original decals can fade, peel, or get scratched from outdoor use. Replacing them with a fresh decal set restores the bike's appearance and makes it look like new. It's also an easy, low-cost way to customize your Strider 12 Sport without buying accessories.
Choosing the right decal set
The replacement decal set for the Strider 12 Sport includes two main frame decals and two rear fork decals. It fits the 12 Sport model only, so double-check compatibility before ordering. The set does not include adhesive instructions, so following a proper application method is important for a lasting finish.
Step-by-step decal application
- Clean the frame thoroughly: Wipe down the frame and fork with isopropyl alcohol or mild soapy water. Remove all dirt, grease, and old adhesive residue. Let it dry completely. A clean surface prevents bubbles and peeling later.
- Dry-fit the decals: Peel the backing slightly and hold each decal over its intended spot. Use masking tape to hold it in place temporarily. Step back to check alignment and spacing before applying. Adjusting now avoids crooked placement that is hard to fix once stuck.
- Apply with wet method (recommended): Mix a drop of dish soap with water in a spray bottle. Lightly mist the frame surface and the decal adhesive side. Slide the decal into position; the water layer lets you adjust without tearing. Squeegee out the water and air bubbles from center outward. The wet method gives you extra time to reposition and reduces bubbles.
- Press and seal the edges: Once the decal is aligned, use a soft cloth or squeegee to press firmly, especially along edges and corners. Let it dry for at least 24 hours before riding or washing the bike. Rushing this step can cause edges to lift after the first ride.
Product facts
-
Decal set for 12 Sport: This replacement set includes two main frame decals and two rear fork decals for Strider 12 Sport bikes. You get exactly the pieces you need to refresh both the frame and the fork area without buying extra decals.
Decal set for 12 Sport
