Quick answer

To apply mini sclera lenses safely, always start with clean hands, inspect the lens for damage, and follow a gentle insertion technique that avoids touching the lens to your eyelid or eyelashes.

Why safety matters with larger-diameter lenses

Mini sclera lenses are larger than standard contacts—17mm compared to the typical 14mm. The bigger diameter covers more of your eye, which can make insertion trickier and raises the risk of trapping air bubbles or debris underneath. A careful, hygienic routine is essential to prevent irritation or infection.

Step-by-step application guide

  1. Wash and dry your hands thoroughly: Use a mild, fragrance-free soap. Rinse completely and dry with a lint-free towel. Any residue or lint can stick to the lens and irritate your eye. Never use moisturizing soaps—they leave a film that can cloud the lens.
  2. Rinse the lens with fresh solution: Take the lens from its case and rinse it with multipurpose contact lens solution. Never use tap water or saliva—they contain microorganisms that can cause severe eye infections.
  3. Inspect the lens for debris or damage: Hold the lens up to light and check for tears, chips, or particles. If the lens looks damaged, discard it and use a new one. A torn lens can scratch your cornea. Even a tiny speck can feel like a rock once inserted.
  4. Place the lens on your dominant-hand fingertip: Balance the lens on the pad of your index finger, making sure the bowl is upright (like a cup). If the edges flare outward, the lens is inside out—flip it gently. Right-side-out mini sclera lenses should form a perfect half-sphere.
  5. Hold your eyelids open wide: Use your non-dominant hand to hold your upper eyelid against your brow bone. Use the middle finger of your lens hand to pull down your lower lid. This prevents blinking during insertion. Keep your grip firm but avoid pressing on the eyeball itself.
  6. Insert the lens looking straight ahead: Look directly into a mirror or straight forward. Gently place the lens onto the center of your eye. Do not slide it sideways. Once the lens touches the eye, release your eyelids slowly and blink gently to seat it. If a bubble appears under the lens, remove it, rinse, and try again.
  7. Check for comfort and centering: After blinking naturally, check that the lens is centered over your iris and that vision is clear (or as expected for non-prescription lenses). Mild irritation usually resolves within a minute. Persistent pain or redness means remove the lens immediately. Always carry your lens case and solution in case you need to remove the lens urgently.

Lens considerations

  • Exodus 17mm (White Mesh 17mm): The Exodus 17mm (White Mesh 17mm) has a diameter of 17mm and water content of 45%. Available in non-prescription 0.00 only. The larger 17mm diameter means the lens covers more of the eye surface, so precise alignment during insertion is crucial to avoid discomfort or bubbles.

    Exodus 17mm (White Mesh 17mm)

    Exodus 17mm (White Mesh 17mm)