Quick answer
To attach a Fidlock magnetic buckle to your camera strap, thread the strap through the buckle's slots, secure it with the locking tab, and test the magnetic connection before use.
Why use a magnetic buckle on your camera strap
A magnetic buckle like the Fidlock lets you detach your camera strap quickly with one hand, which is helpful when switching between handheld and strapped shooting. The magnet holds firmly during use but releases easily when you pull apart the two halves.
The VSGO Fidlock magnetic buckle is available as a standard configuration item, meaning it's designed to work with compatible straps without additional adapters.
Step-by-step: Attaching the Fidlock magnetic buckle
- 1. Separate the buckle halves: Pull the two halves of the Fidlock magnetic buckle apart. You'll have one half with a slot for the strap and a locking tab, and the other half with the magnetic connector. Don't force the halves apart if they feel stuck — slide them sideways to break the magnetic hold.
- 2. Thread the strap through the buckle half: Take the half with the slot and locking tab. Feed the loose end of your camera strap through the slot from bottom to top, then pull enough strap length through to work with. Make sure the strap is not twisted inside the slot — a twisted strap can cause the buckle to sit crooked and wear unevenly.
- 3. Secure the strap with the locking tab: Fold the strap end back over itself and press it under the locking tab. The tab should hold the strap firmly in place. Pull the main strap to tighten the buckle against the strap. If the locking tab doesn't close completely, the strap may be too thick — check that you're using a compatible strap width.
- 4. Repeat for the other half: Attach the second buckle half to the other end of your camera strap using the same threading and locking method. Make sure both buckle halves face the same direction so the magnets align properly when you connect them.
- 5. Test the connection: Bring the two buckle halves together until they click into place magnetically. Give the strap a gentle tug to confirm the connection is secure. Then practice releasing by pulling the halves apart. If the magnets don't align, the buckle halves may be flipped — rotate one half 180 degrees and try again.
Product facts
-
Fidlock® magnetic buckle: The VSGO Fidlock magnetic buckle is listed in the Standard configuration and identified as a Fidlock magnetic buckle. This means it's ready to use with most standard camera straps without needing extra hardware or modification.
Fidlock® magnetic buckle
