Quick Answer

To build a Tegu magnetic racer, start with a flat base of magnetic wooden blocks, attach the Magnetic Wooden Wheels set to the bottom, and then add a simple body and windshield for a sturdy, rolling car.

Why Wooden Wheels Work Best

The Magnetic Wooden Wheels set (4 pieces) is designed to integrate seamlessly with any Tegu block set. The wheels have built-in magnets that attach directly to the magnetic faces of your blocks, so you don't need axles or connectors. This makes building a racer quick and reversible—you can change the wheelbase or swap wheels between creations in seconds.

One trade-off: because the wheels attach magnetically, they work best on flat, level surfaces. On thick carpet or uneven ground, the magnets may not hold as firmly, and the car might tip. For the smoothest roll, build on a hard floor or a low-pile rug.

Build Your Tegu Racer in 5 Steps

  1. Choose a flat base: Select two or three rectangular Tegu blocks and lay them side by side to form a flat, even platform. This will be the chassis of your racer. Make sure the magnetic faces are facing down so the wheels can attach. Check that the base is level—if it's uneven, the car may wobble when rolling.
  2. Attach the wooden wheels: Take one Magnetic Wooden Wheel and place it on the underside of the base, near one end. The magnet will snap into place. Repeat on the other end, and then add two more wheels to the opposite side to create a four-wheel setup. Ensure all four wheels are aligned in the same direction so the car rolls straight.
  3. Build the body: Stack a few blocks on top of the base to create a simple body. Use a large block for the main cabin and smaller blocks for details like a hood or trunk. Keep the center of gravity low by not stacking too high. Avoid tall, top-heavy builds—they tend to tip over during play.
  4. Add a windshield and driver: Place a thin, flat block vertically near the front of the body to act as a windshield. You can also add a small block as a driver's seat. This gives your racer a more finished look and makes it fun to role-play. Make sure the windshield block is firmly attached; if it's loose, it may fall off when the car moves.
  5. Test and refine: Give your racer a gentle push on a flat surface. Watch how it rolls. If it veers to one side, check that the wheels are aligned. If it tips, remove some top blocks to lower the center of gravity. Refining the design is part of the fun—experiment with different block arrangements to improve speed and stability.

Product Facts

  • Magnetic Wooden Wheels Magnetic Wooden Blocks 4 pieces: Four Magnetic Wooden Wheels integrate seamlessly with an existing set of Tegu Blocks to mobilize any creation. These wheels attach directly to the magnetic faces of your blocks, so you can add them to any build without extra parts, making it easy to turn a static model into a rolling racer.

    Magnetic Wooden Wheels Magnetic Wooden Blocks 4 pieces

    Magnetic Wooden Wheels <br>Magnetic Wooden Blocks <br>4 pieces

Once your racer is rolling, try building different vehicle ideas—like a truck or a bus—by swapping the body blocks. The Magnetic Wooden Wheels set makes it easy to transform any Tegu creation into a moving masterpiece.