Quick Answer
Clean your eufy Smart Scale P2 Pro weekly with a soft, slightly damp microfiber cloth and mild soap. Avoid harsh chemicals, submerging the scale, or using abrasive pads to protect the sensors and finish.
Why regular cleaning matters for accuracy
Dust, moisture, and residue on the scale’s surface or sensors can interfere with the 50 g/0.1 lb high accuracy measurements. The P2 Pro uses advanced full body composition analysis, so keeping the contact points clean ensures consistent readings for all 16 metrics, including body fat, heart rate, and bone mass.
What not to use
Avoid bleach, ammonia, alcohol-based wipes, or any abrasive scrubbers. These can damage the tempered glass surface and the sensor coating. Do not spray cleaner directly onto the scale; moisture can seep into the electronics and affect Wi-Fi and Bluetooth connectivity.
Step-by-Step Cleaning and Maintenance
- Step 1: Power off and remove batteries: Turn off the scale and take out the batteries. This prevents accidental activation and protects the electronics if any moisture gets near the battery compartment. Always remove batteries before wet cleaning to avoid short circuits.
- Step 2: Wipe the surface with a damp microfiber cloth: Dampen a soft microfiber cloth with water and a drop of mild dish soap. Wring it out until barely damp. Gently wipe the entire glass top, including the sensor areas. Do not let liquid pool on the surface. Excess moisture can damage internal components; the cloth should feel almost dry.
- Step 3: Dry immediately with a separate dry cloth: Use a clean, dry microfiber cloth to buff the surface until no streaks remain. Pay extra attention to the four sensor pads to ensure they are completely dry before the next use. Leaving moisture on sensors can cause inaccurate heart rate or body fat readings.
- Step 4: Clean the bottom sensors and rubber feet: Turn the scale over. Use a dry toothbrush or soft brush to gently remove dust and debris from the rubber feet and any bottom vents. This keeps the scale stable on tile or hardwood floors. Dirt on the feet can make the scale wobble and affect weight accuracy.
- Step 5: Reinsert batteries and test: Wait at least 10 minutes after cleaning to ensure everything is dry. Reinsert the batteries, power on, and step on the scale once to confirm the display and Bluetooth connection work normally. If the display flickers or Wi-Fi fails, moisture may still be present—repeat the drying step.
Product Facts
-
eufy Smart Scale P2 Pro with soundcore AeroClip: eufy Smart Scale P2 Pro: Digital Bathroom Scale with Wi-Fi Bluetooth, 16 Measurements, 50 g/0.1 lb High Accuracy. The high precision means even a thin layer of dust or moisture can throw off your body composition trends, so keeping the scale clean helps you trust the data.
eufy Smart Scale P2 Pro with soundcore AeroClip
