Quick Answer
Use the Banana Prosthetics shade sampler set to test and mix colors before applying silicone tint to your packer, ensuring a perfect match for your skin tone.
Why Color Samples Matter
Silicone packers come in a limited set of stock colors, but real skin tones vary widely. A color sample set lets you try multiple shades without committing to a full-size product, saving money and reducing waste.
Trade-offs to Consider
DIY tinting is permanent for silicone; you cannot remove or lighten the color once mixed. Always test on a small, inconspicuous area first. The sampler set is non-returnable, but it is a low-cost way to avoid costly mistakes.
How to Customize Your Packer with Color Samples
- 1. Gather Your Supplies: You will need the shade sampler set, a clean silicone packer, a mixing palette (or non-porous surface), a small spatula or toothpick, and silicone-safe pigment (if mixing). Use only pigments labeled for silicone to avoid damaging the packer.
- 2. Test the Sampler Shades: Apply a small dab of each sample to your inner wrist or forearm. Let it dry completely (about 10 minutes) to see the true cured color. Compare in natural daylight, not under artificial light. Silicone color can shift slightly when cured, so always wait for the sample to dry.
- 3. Mix Your Custom Color: On your palette, combine two or more sample shades using a spatula until you achieve the desired tone. Start with a 1:1 ratio and adjust gradually. Document the ratios for future reference. Mix only a small batch first; you can always add more, but you cannot remove excess pigment.
- 4. Apply the Tint to the Packer: Using a clean brush or sponge, apply the mixed color to the packer in thin, even layers. Allow each layer to cure fully (per pigment instructions) before adding the next. Build up color slowly. Thick layers can cause uneven curing or a tacky surface. Patience yields a natural finish.
- 5. Seal and Cure: Once you are satisfied with the color, let the packer cure in a dust-free area for the time recommended by the pigment manufacturer (usually 24-48 hours). Avoid touching or wearing it during this period. Skipping full cure time can lead to color transfer or sticky residue on clothing.
Product Facts
-
Échantillon des teintes: Contains samples of all 7 available shades designed to assist with color selection. You can compare all shades side by side in natural light before mixing or applying, which reduces guesswork and the risk of an unnatural match.
Échantillon des teintes
