Quick answer

Use a frame with UV-filtering glass or acrylic, mount the sheet with acid-free materials, and hang it away from direct sunlight and humidity. Avoid adhesives and excessive pressure to prevent creases and ink damage.

Choose the right frame and materials

Select a frame that fits the sheet size with at least 1 inch of mat border. Use acid-free mat board and backing to prevent yellowing. Opt for UV-filtering glass or acrylic to block harmful light. Avoid frames with tight clips that can dent edges.

Handle the sheet with care

Before framing, wash and dry your hands thoroughly. Work on a clean, flat surface covered with a soft cloth. Hold the sheet by opposite corners to avoid bending. If the sheet is signed, avoid touching the signature area directly.

Mount the sheet without adhesives

Use photo corners or acid-free mounting strips to secure the sheet to the mat. Never use tape, glue, or spray adhesive. These can stain or warp the paper over time. If the sheet is valuable, consider professional framing.

Hang and maintain the display

Hang the frame on an interior wall away from direct sunlight, heat sources, and damp areas like bathrooms. Use two hooks for stability. Check periodically for dust and humidity. Dust with a soft, dry cloth only.

Step-by-step framing process

  1. Prepare your workspace: Clean a large table and cover it with a soft, lint-free cloth. Gather acid-free mat, backing, mounting corners, and UV glass. Checkpoint: Ensure no food, drinks, or pets are nearby.
  2. Inspect the sheet: Look for existing creases,签名 smudges, or edge wear. Note any imperfections so you can position the sheet to minimize their visibility. Mistake to avoid: Ignoring small flaws can lead to further damage during mounting.
  3. Mount with photo corners: Place the sheet face up on the mat. Slide acid-free photo corners over each corner. Do not press hard; the sheet should be held gently. Checkpoint: The sheet should not shift when you lift the mat slightly.
  4. Assemble the frame: Place the glazing (UV glass) over the mounted sheet, then the backing. Secure the frame according to its instructions. Avoid over-tightening. Mistake to avoid: Using a frame that is too tight can bow the sheet.
  5. Hang safely: Choose an interior wall away from windows, vents, and dampness. Use two hooks rated for the frame's weight. Level the frame. Checkpoint: The frame should sit flush against the wall without wobbling.
  6. Maintain regularly: Dust the glass with a microfiber cloth. Check for condensation or pests every few months. If you notice any change, consult a conservator. Next step: Set a calendar reminder for seasonal checks.

Product facts

  • CHINATOWN UNCUT SHEET SIGNED BY FULTON AND DAN AND DAVE: Ten years old and extremely rare. Signed by Dan Phillips, Fulton and Dan and Dave Buck. These are in great shape but being uncut stored for a decade you may find a slight imperfection that will be minor. Excellent for framing. This signed uncut sheet is a rare collectible that deserves careful framing to preserve its condition and value.