What You Need Before You Start
Installing a bed rail is a straightforward way to make your toddler's transition from cot to bed safer. Before you begin, confirm your bed type and the rail's compatibility. The Baby Plus Bed Rail is suitable for both divan and framed beds, while the Dreambaby Prague Bedrail works with divan and slatted bed bases with narrow gaps. Neither rail is intended for recessed beds or bunk beds.
You will need the rail itself, a screwdriver (for the Baby Plus screw-in mounting system), and a few minutes of calm time. The Dreambaby Prague Bedrail requires no tools for assembly.
Step-by-Step Installation
The exact steps vary by model, but the general process is similar. Follow these steps for either rail, then check the model-specific details below.
- 1. Position the rail on the bed: Place the rail against the side of the mattress, centered where you want the barrier. The rail should sit flush against the mattress edge, with the fabric panel facing inward.
- 2. Attach the mounting system: For the Baby Plus Bed Rail, use the supplied screws to secure the metal frame to the bed frame. The screw-in mounting system keeps it firmly in place. For the Dreambaby Prague Bedrail, the anchoring system secures it without tools – just follow the included instructions to tighten the straps or brackets under the mattress.
- 3. Lock the rail in the upright position: Both rails have locking mechanisms. The Baby Plus features a two-button locking system for additional security. Make sure both buttons click into place. The Dreambaby Prague has a fold-down side panel; ensure it is locked in the upright position before use.
- 4. Check for gaps and stability: After installation, push on the rail from both sides. It should not move more than a few millimeters. Check for any gap between the rail and the mattress – if you can fit more than two fingers, adjust the position or re-tighten the mounting. A secure fit prevents your toddler from getting stuck between the rail and the bed.
Product Facts: Two Bed Rails Compared
-
baby plus Bed Rail 120cm - White: Baby Plus Bed Rail 120cm – White: 180-degree foldable design, screw-in mounting, two-button locking, complies with BS 7972:2001 + A1:2009. The foldable design lets children get in and out of bed easily, while the screw-in mount provides a very secure attachment for active toddlers.
baby plus Bed Rail 120cm - White
-
Dreambaby Prague Bedrail 110cm Wide x 45.5cm High - White: Dreambaby Prague Bedrail 110cm x 45.5cm – White: extra-wide and tall, fold-down side panel, tool-free assembly, breathable mesh, complies with BS7972:2001 + A1:2009. The extra height and width offer more coverage, and the tool-free setup makes it ideal for travel or moving between rooms.
Dreambaby Prague Bedrail 110cm Wide x 45.5cm High - White
Using the Fold-Down Feature Safely
Both rails allow your child to get in and out of bed with minimal help. The Baby Plus Bed Rail folds 180 degrees down to the side of the bed, creating a clear opening. The Dreambaby Prague Bedrail has a dedicated fold-down side panel that also makes bed-making easier.
Always lower the rail fully before your child tries to climb out, and raise it back to the locked upright position once they are in bed. Never leave the rail partially folded – it could create a tripping hazard or an unstable barrier.
Safety Checks After Installation
After the first night, re-check all fastenings. Toddlers can wiggle and shift the rail over time. For the Baby Plus rail, tighten the screws again if needed. For the Dreambaby Prague, ensure the anchoring straps are still snug under the mattress.
The Dreambaby Prague Bedrail is suitable for children aged 18 months to 5 years. The Baby Plus Bed Rail does not have a stated age range in the supplied information, so use your judgment based on your child's size and mobility. Both rails are not suitable for adults or elderly users.
Adult supervision is recommended during use for both products. If the fabric becomes soiled, the Dreambaby Prague cover is removable and machine washable – the Baby Plus mesh care instructions are not confirmed in the supplied information.




