Quick answer
Installing Diggs Evolv Doors & Panels add-ons is straightforward once you confirm your crate size and choose the correct panel or door configuration. This guide walks you through the process step by step.
Before you start: check your crate size and configuration
The Evolv Doors & Panels add-ons are available in sizes S, M, I, and L. You must match the add-on size to your existing Evolv crate model. The configuration options include Rear Panel, Side Panel, or Front/Rear Door. Choosing the wrong size or configuration is the most common mistake, so double-check your crate’s label or original order before purchasing.
Step-by-step installation
- Step 1: Remove the existing panel or door: Unlatch the panel or door you want to replace. Lift it off the hinge pins and set it aside. If your crate has multiple panels, note which one you are removing to avoid confusion later. Common mistake: forgetting to unlatch all locking points before lifting. Check both top and bottom latches.
- Step 2: Align the new add-on panel or door: Hold the new Evolv Doors & Panels add-on at the same angle as the original. Line up the hinge slots on the panel with the hinge pins on the crate frame. Press gently until the pins seat fully into the slots. Common mistake: forcing the panel at the wrong angle. If it doesn't slide on easily, adjust the angle slightly.
- Step 3: Secure and test the installation: Close the latches on the new panel or door. Give it a gentle shake to confirm it is locked in place. Open and close the door or panel a few times to ensure smooth operation. Common mistake: skipping the shake test. A loose panel can shift during use, so always verify it's secure.
What you need
-
Evolv Doors & Panels - Add-Ons: Diggs Evolv Doors & Panels are add-on spare parts designed to fit your Diggs Evolv crate. Available in sizes S, M, I, and L. Select from Rear Panel, Side Panel, or Front/Rear Door configurations. Choosing the right size and configuration ensures a snug, secure fit and avoids the frustration of ordering a part that won't attach to your crate.
Evolv Doors & Panels - Add-Ons
