Quick Answer
To install the Laserox Frostbox wooden insert in Frosthaven, unpack the boards, dry-fit the main trays, then glue the larger boxes while keeping card organizers unglued for flexibility.
Why the Monster Box Version Changes Your Installation Order
The Frostbox insert you have is the Monster Box version, which means it includes a large five-level box designed to store all monster figures and standees in one place. That big box changes the assembly sequence: you should build it first so it can sit at the bottom of the game box and support the trays above it. If you assemble the smaller card trays first, you may find yourself rearranging everything when the monster box doesn't fit as expected.
Another reason to start with the monster box is that its size makes it the most rigid part of the insert. Once glued, it gives the whole structure stability, so the trays you add later have a solid base. Skipping this step often leads to wobbly trays and a lid that doesn't close flush.
Glue vs. No-Glue: What to Assemble Permanently
Laserox inserts are laser-cut plywood that you can either press-fit or glue. The card organizers—the small trays for ability cards, items, and event decks—fit snugly enough that you can leave them unglued. This lets you lift them out to access the tokens stored underneath or to swap them if you later buy sleeves that change the card dimensions.
The larger structural pieces, like the monster box and the token trays that hold heavy pieces, benefit from wood glue. A drop of glue on the joints makes them permanent and prevents them from coming apart when you carry the box. Just be careful not to glue the card organizers unless you are certain about your sleeving plans.
Step-by-Step Installation
- Unpack and sort all wooden pieces: Lay out every board from the Laserox Frostbox insert on a flat surface. Group them by size and shape, referring to the included instruction sheet. Check that no pieces are missing or damaged before you start. Take a photo of the unassembled pieces; it helps you remember the layout if you pause mid-build.
- Dry-fit the monster box first: Assemble the five-level monster box without glue to confirm the joints align. This is the largest structure and will sit at the bottom of the game box. If any tabs don't fit, sand them lightly with fine-grit sandpaper—do not force them. The monster box must sit flat; a warped base will cause the entire insert to sit unevenly.
- Glue the monster box joints: Apply a thin layer of wood glue to the tabs and slots of the monster box, then press the pieces together. Wipe off excess glue with a damp cloth. Allow it to dry completely before moving on—usually 30 to 60 minutes. Use a clamp or heavy book to hold the box square while the glue dries; this prevents warping.
- Assemble the token trays: Dry-fit the smaller trays for tokens, health dials, and other components. Once you confirm the fit, glue the joints that hold the tray walls together. Keep the trays that will hold frequently accessed tokens unglued if you want to lift them out later. Label each tray with a sticky note as you finish it; this saves time when placing them in the box.
- Place the card organizers without glue: Fit the card organizers into the designated slots in the insert. Do not glue them—they should stay removable so you can access the storage underneath or accommodate sleeved cards. Press them firmly into place to ensure they sit flush. Test that each card organizer holds a deck of cards without bending or sticking; adjust if needed.
- Insert the assembled structure into the game box: Carefully lower the completed insert into the Frosthaven box, starting with the monster box at the bottom. Add the token trays and card organizers in their designated positions. Ensure the lid closes without bulging; if it doesn't, check for misaligned trays. If the lid doesn't close flush, remove the top layer of trays and re-seat them one by one to find the culprit.
Product Facts
-
Frosthaven: Laserox Wooden Game Insert: The Frostbox wooden insert from Laserox and Cephalofair Games is the Monster Box version, which stores monsters in a big, five-level box. The five-level monster box is the largest component, so assembling it first ensures the rest of the insert fits around it and keeps the lid closed properly.
Frosthaven: Laserox Wooden Game Insert
