Quick Answer
To protect your TEKKO ONE from drops, install the Impact Case by aligning the console with the case's edges, pressing it in firmly, and checking that all ports and buttons remain accessible.
Why a snug fit matters
The Impact Case is shaped specifically for the TEKKO ONE Retro Games Console, so a correct fit is key to getting the drop protection you expect. If the case is loose, the console can shift inside and still take impact damage. If it's too tight, you may struggle to close it or risk stressing the seams.
The case is available in black and is designed to fit the console's exact dimensions. Because it is a protective accessory, it adds a small amount of bulk, which is the trade-off for better drop protection. You can still use all ports and buttons while the case is on, but you'll notice the console feels slightly larger in hand.
Step-by-Step Installation Guide
- Prepare your console and case: Place your TEKKO ONE on a clean, flat surface and remove any cables or accessories. Unpack the Impact Case and check that the color option matches your console. Common mistake: installing the case with cables still attached can cause misalignment and leave the console unprotected. Check that the case is the correct model for the TEKKO ONE before starting.
- Align the console with the case: Hold the Impact Case with the opening facing up. Slide the TEKKO ONE console in gently, ensuring the ports and buttons align with the case cutouts. Avoid forcing it—if it doesn't slide easily, rotate the console 180 degrees. The case is designed specifically for the TEKKO ONE, so a snug fit is normal; forcing it can damage the case or console.
- Secure the console and check fit: Press the console fully into the case until it sits flush. Verify all openings (ports, buttons, vents) are aligned. Close any straps or flaps if present, and confirm the console doesn't shift when you gently shake the case. If the console moves inside the case, the fit is not secure—reposition it before relying on the case for protection.
Product facts
-
Impact Case: The Impact Case is specifically designed to fit the TEKKO ONE Retro Games Console and is available in black. This ensures a precise, snug fit that keeps the console protected without blocking ports or controls.
Impact Case
