Quick answer
To get the perfect knickers fit, take three key measurements: waist, hips, and rise. Use a soft measuring tape, keep it snug but not tight, and record the numbers without adding extra room.
Why accurate measurements matter for silk knickers
Silk and delicate mesh fabrics like those used in our Sweet Pea knickers have minimal stretch compared to cotton blends. An accurate measurement ensures the fabric sits smoothly without digging in or sagging.
A common mistake is to rely on your dress size. Lingerie sizing varies between brands, so always measure fresh for each purchase.
Step-by-step measuring guide
- Measure your natural waist: Wrap the tape around the narrowest part of your torso, usually just above your belly button. Keep it parallel to the floor and snug—not tight. Breathe normally and record the number. Common mistake: measuring over clothing or pulling the tape too tight. Use bare skin for accuracy.
- Measure your hips at the widest point: Stand with feet together and wrap the tape around the fullest part of your hips and bottom. Ensure the tape stays level all the way around. Record the measurement. Common mistake: measuring too high or too low. Check in a mirror to confirm the tape is at the widest curve.
- Measure your rise (front and back): Sit on a hard chair and measure from the center of your natural waist down to the chair surface. This gives your front rise. For back rise, measure from the same waist point down over the fullest part of your bottom to the chair. Common mistake: ignoring rise. A too-short rise causes wedgies; too-long rise leads to bunching. Compare your numbers to the product's rise measurement if available.
Product facts
-
Sweet Pea knickers: The Sweet Pea knickers are handcrafted in light green mesh and are low-rise with a cheeky cut. Because the mesh has less give than cotton, an accurate waist and hip measurement ensures the low-rise style stays comfortably in place without rolling.
Sweet Pea knickers
