Quick answer
Always wash your hands, inspect the lens, and use the pinch method to remove it—never pull or scrape the lens off your eye.
Why sclera lenses need extra care
Sclera lenses are larger than regular contacts and cover the white part of your eye. That means they have a bigger surface area and sit closer to delicate tissue, so proper handling matters more.
Because they are thicker and less flexible, forcing them in or out can cause discomfort or tiny scratches. Taking an extra minute to follow a clean routine protects both the lens and your eye.
Common mistakes to avoid
The biggest errors are using fingernails to grip the lens, inserting it before checking it is right-side out, and rushing the removal when the lens feels stuck.
Another frequent slip is reusing old solution or topping it off. Always use fresh lens solution and never water or saliva.
Step-by-step sclera lens routine
- Wash and dry your hands: Use mild soap, rinse well, and dry with a lint-free towel. Never use oily or scented soap. Check that your nails are short and smooth before handling the lens.
- Inspect the lens: Place the lens on your fingertip and hold it up to light. Make sure it is not torn, chipped, or inside out. The edge should curl upward like a bowl, not flare out. If the lens is damaged or inside out, do not insert it—replace it or flip it.
- Rinse with fresh solution: Apply a few drops of fresh lens solution to both sides of the lens. Never top off old solution in the case. Use only the solution recommended for your lens type.
- Hold your eye open: Use your middle fingers to pull your upper and lower eyelids back, keeping them away from the lens path. Avoid blinking until the lens is placed.
- Insert the lens gently: Look straight ahead or slightly upward, then place the lens directly onto your eye. Do not press hard or slide it across the white of the eye. Blink slowly and check for comfort. If it stings or shifts, remove and re-rinse.
- Remove with the pinch method: Wash your hands again, look up, and use your index finger to slide the lens down onto the white of the eye. Then gently pinch the lens with your thumb and index finger to lift it off. Never use fingernails or suction tools. If the lens feels stuck, add a drop of solution and blink before trying again.
- Clean and store properly: Rub the lens with fresh solution, rinse, and place it in a clean case filled with fresh solution. Close the case tightly. Replace the solution every day and never reuse it.
Lens feature to know
-
17mm UV White Blind M: This 17mm UV white blind lens has a base curve of 10mm and is made from hydrogel with 40% water content. The larger diameter and fixed base curve mean you need a precise fit and careful insertion so the lens centers properly without folding.
17mm UV White Blind M
