Quick answer

To replace ear pads on Focal headphones, gently pry off the old pads from the mounting ring, then snap the new Dekoni Audio earpads into place, ensuring they are seated evenly.

Why replace ear pads on Focal headphones

Over time, original ear pads compress and lose their cushioning, affecting both comfort and sound isolation. Replacing them restores a snug fit and can even tune the sound signature depending on the material you choose.

Dekoni Audio offers earpads for Focal Bathys, Bathys MG, Hadenys, Azurys, and Lensys models. Their memory foam pads let you select between materials like genuine sheepskin for a tighter seal or other options for breathability.

Steps to replace ear pads on Focal headphones

  1. Remove the old ear pad: Grip the ear pad near the mounting ring and gently pull it away from the headphone. The pad is held on by a friction fit, so a firm, steady pull should release it. Work around the entire circumference if needed. Do not use sharp tools that could scratch the plastic mounting ring.
  2. Clean the mounting ring: Wipe the exposed ring with a dry microfiber cloth to remove dust, oils, or debris. A clean surface helps the new pad seat properly and prevents rattles. Skip liquids or cleaners that could seep into the driver assembly.
  3. Align the new Dekoni Audio earpad: Hold the replacement pad so the mounting groove faces the ring. Press one edge into the groove, then work your way around, pressing firmly until the pad snaps into place. You should hear a series of clicks as it locks. If the pad feels loose, remove it and restart—don't force it unevenly.
  4. Check the seal and repeat on the other side: Run your finger along the seam to ensure the pad is fully seated with no gaps. Repeat the process for the second earcup. After both are installed, wear the headphones and adjust the headband to confirm even pressure. A poor seal reduces bass response and noise isolation, so verify both sides are identical.

Product facts