Quick Answer
To replace the drink-thingy on a Clek Oobr or Olli, simply pull the old cup holder upward from the armrest, then press the new one firmly into place until it clicks. No tools are needed.
When You Need a Replacement drink-thingy
The drink-thingy (cup holder) on Clek booster seats is designed to be removable for cleaning, but over time the plastic can wear or break, especially if a child uses it as a handle or if the seat is stored roughly. A cracked or loose cup holder won't hold drinks securely, so replacing it keeps the seat fully functional.
Both the Oobr and Olli use their own specific drink-thingy models, so make sure to order the correct part for your seat.
Removing the Old drink-thingy
Start by lifting the old cup holder straight up from the armrest. It is held in by friction and a small tab, so a firm upward pull is all that is needed. If it feels stuck, try wiggling it side to side while pulling.
Common mistake: Do not twist or pry with a tool, as that can damage the armrest attachment point. If the cup holder is broken and pieces remain, use needle-nose pliers to gently remove any fragments.
Installing the New drink-thingy
Take the new drink-thingy and align the prongs on its base with the slots in the armrest. Press down firmly until you hear a click. Give it a gentle tug to confirm it is locked in place.
Both the Oobr and Olli cup holders are dishwasher safe, so you can clean the new one before installation if desired. Place it on the top rack only.
Step-by-Step Replacement Guide
- Remove the Old Cup Holder: Grip the existing drink-thingy firmly and pull it straight upward from the armrest. If it resists, wiggle it gently side to side. Do not use tools that could scratch the plastic. Check that no broken plastic pieces remain inside the armrest slot before installing the new part.
- Align the New Cup Holder: Take the replacement drink-thingy and line up the prongs on its underside with the corresponding slots in the armrest. Make sure the orientation matches the original (the cupholder opening faces forward). If the prongs don't align easily, you may have the wrong model—double-check that you have the correct part for Oobr or Olli.
- Press into Place: Push the new cup holder straight down until you hear a distinct click. Give it a light upward tug to verify it is secure. If it pops out, press again with more force. A properly installed cup holder will not wobble or slide out when a drink is placed in it.
Product Facts
-
drink-thingy for oobr: Replacement drink-thingy for Oobr. When the time comes for cleaning, the cup holder can be easily removed and is dishwasher safe. This means you can keep the cup holder clean without worrying about damage, and replacing a worn one restores the seat's original drink-holding function.
drink-thingy for oobr
-
drink-thingy for olli: Replacement cup holder for Olli backless booster models. If your Olli's cup holder is lost or cracked, this part fits exactly and restores the booster's convenience for your child.
drink-thingy for olli
