Quick answer
To set up a pressurised pond filter kit, position the filter above the pond, connect the pump to the inlet and the return hose to the outlet, then prime the system before switching on the pump.
Why filter placement matters
The AllPondSolutions Pressurised Pond Filter Kit PFC-20000 is designed to work with its AquaECO-10000 pump, which keeps the filter continuously pressurised. This means the pump must be placed below the filter, ideally at pond level, to ensure a steady flow of water into the filter.
Because the filter operates under pressure, you can hide it out of sight or even bury it, as long as the hoses are connected correctly and the lid remains accessible for maintenance.
Choosing the right hoses
The kit includes the necessary connections, but you will need to select hose sizes that match your pump outlet and filter inlet. Using the wrong hose size can cause leaks or reduce flow, so check the diameter before cutting.
If you are unsure, measure the pump outlet and filter inlet ports with a ruler or calliper, and choose hoses that fit snugly with hose clips.
Step-by-step setup guide
- Position the filter: Place the filter near the pond, ideally above water level, on a stable, level surface. Make sure the lid can be opened easily for maintenance. Check that the filter is not in a low-lying area prone to flooding.
- Connect the pump: Submerge the AquaECO-10000 pump in the pond and connect the hose from the pump outlet to the filter inlet. Use hose clips to secure the connection. Ensure the pump is fully submerged before starting to avoid air locks.
- Attach the return hose: Connect a hose to the filter outlet and run it back to the pond, directing the water flow to create good circulation. Avoid kinks in the return hose, as they can restrict flow and reduce filtration efficiency.
- Prime the system: Before switching on the pump, open the filter lid and fill the filter chamber with pond water. This helps prime the system and prevents the pump from running dry. If the pump still doesn't push water, check for air leaks in the hoses and re-prime.
- Start the pump and check for leaks: Switch on the pump and inspect all connections for leaks. Adjust the flow if needed, and let the filter run continuously for best results. Run the filter 24/7, especially during the first few weeks, to establish beneficial bacteria.
What you need to know about the kit
-
AllPondSolutions Pressurised Pond Filter Kit PFC-20000 & AquaECO-10000: The PFC-20000 includes seven foams and an 18W UV lamp, and it is paired with the AquaECO-10000 pump. The seven foams provide mechanical and biological filtration, while the UV lamp helps control algae, so the kit is ready for a serious pond setup out of the box.
AllPondSolutions Pressurised Pond Filter Kit PFC-20000 & AquaECO-10000
