Quick Answer
To set up a Nanlite Quick-Release Super Clamp, open the clamp jaw, position it onto a stand or truss pipe, tighten the locking knob, then attach your fixture using the quick-release mounting point.
Why Use a Super Clamp Instead of a Standard Light Stand?
A standard light stand works fine for most floor-based setups, but when you need to fly a fixture from pipe, truss, or a horizontal arm, a super clamp is the right tool. The Nanlite Quick-Release Super Clamp is rated for the Forza, FC, Alien, and PavoSlim fixtures, making it a versatile grip option for studio and location work.
What About the Nanlite Swivel Holder?
If you are using a PavoSlim 60 or 120 panel and need to tilt the light at an angle on a standard stand, the Nanlite Swivel Holder replaces the supplied bracket. It is not a clamp—it is a yoke that mounts onto a stand. For pipe or truss mounting, stick with the super clamp.
Step-by-Step Setup
- 1. Open the Clamp Jaw: Turn the main locking knob counter-clockwise until the jaw opens wide enough to fit around your stand, pipe, or truss tube. The clamp fits diameters typical on grip stands and lighting rigs. Common mistake: Forcing the clamp onto a pipe that is too large. If the jaw does not close fully, choose a different mounting point.
- 2. Position the Clamp: Slide the open jaw around the pipe or truss at your desired height and orientation. Make sure the quick-release mounting point faces the direction you want your fixture to point. Check that the clamp is level before tightening. A tilted clamp will make the fixture hang unevenly.
- 3. Tighten the Locking Knob: Turn the main locking knob clockwise until the clamp grips the pipe firmly. Do not overtighten—stop when the clamp no longer slides or rotates on the pipe. Overtightening can damage the clamp threads or the pipe surface. Snug is enough.
- 4. Attach Your Fixture: Use the quick-release mounting point on the clamp to attach your Nanlite Forza, FC, Alien, or PavoSlim fixture. Follow the fixture's own mounting instructions to lock it in place. Always support the fixture with your hand until it clicks or locks. A dropped light can damage the fixture or injure someone below.
- 5. Test the Security: Gently tug the fixture and the clamp to confirm nothing shifts. If the clamp slips, re-tighten the knob slightly. If the fixture wobbles on the quick-release, check that the mounting plate is fully engaged. A loose clamp or fixture can cause a dangerous fall. Always double-check before letting go.
Products Used in This Guide
-
Nanlite Quick-Release Super Clamp for Forza, FC, Alien and PavoSlim: The Nanlite Quick-Release Super Clamp is a heavy-duty clamp with a quick-release mounting point, designed to grip pipe, truss, and bar diameters typical on grip stands and lighting rigs. This clamp lets you securely mount a fixture off a horizontal arm or truss, giving you more positioning options than a standard light stand alone.
Nanlite Quick-Release Super Clamp for Forza, FC, Alien and PavoSlim
-
Nanlite Swivel Holder for PavoSlim 60 and 120: The Nanlite Swivel Holder is a stand-mount yoke for the PavoSlim 60 and PavoSlim 120 panel lights, letting the panel tilt and lock at any angle on a standard light stand. If you own a PavoSlim panel and need tilt adjustment on a stand, this accessory replaces the fixed bracket—but it is not designed for pipe or truss mounting.
Nanlite Swivel Holder for PavoSlim 60 and 120
