Quick Answer

Sew a sturdy scissor case with metallic thread by using a longer stitch length and a sharp needle. Keep your sewing tools organized and protected.

Why Metallic Thread Needs Special Handling

Metallic thread adds sparkle but can be tricky. It tends to shred if the needle is dull or the tension is too tight. Use a larger needle eye and reduce top tension slightly to avoid breakage. A slower sewing speed also helps the thread feed evenly.

Choosing the Right Scissor Case Size

Measure your scissors before cutting fabric. Add 1 inch to the length and 2 inches to the width for seam allowance and a fold-over flap. This ensures the case fits snugly without being too tight.

Step-by-Step Instructions

  1. Prepare Your Fabric and Pattern: Cut two rectangles of cotton fabric: one for the outer case and one for the lining. Each should be 2 inches wider than your scissors and 1 inch longer. Also cut a piece of batting the same size. Check that the fabric rectangles are at least 1 inch longer than the scissors so the case closes fully.
  2. Layer and Pin the Pieces: Place the outer fabric right side down, then batting, then lining fabric right side up. Pin all layers together. Mark a 1/4 inch seam allowance around the edges. Use plenty of pins to prevent layers from shifting, especially when sewing with metallic thread.
  3. Thread Your Machine with Metallic Thread: Use a new sharp needle (size 80/12 or 90/14) designed for metallic threads. Loosen the top tension by one or two numbers. Wind a fresh bobbin with all-purpose thread in a matching color. Test on a scrap first. If the thread shreds, increase the needle size or reduce tension further.
  4. Sew the Case Perimeter: Starting at the bottom edge, sew a 1/4 inch seam around three sides, leaving the top open. Use a 2.5 to 3 mm stitch length. Backstitch at the start and end. Clip the corners diagonally to reduce bulk. Sew slowly and guide the fabric evenly. Metallic thread can snap if you pull or push the fabric.
  5. Turn and Topstitch the Opening: Turn the case right side out through the open top. Press flat with a warm iron. Fold the top edge 1/2 inch to the inside and press. Topstitch close to the fold using metallic thread, securing the opening. Use a walking foot if your machine has one. It helps feed the layers evenly and prevents skipped stitches.
  6. Insert Your Scissors and Enjoy: Slide your scissors into the case with the handles sticking out. The case protects the blades and keeps them from snagging other items in your sewing basket. Store the case in a drawer or basket with your Klasse Needles scissor set for a coordinated look.

  • Klasse Needles B4725 Scissor Set 3pc Iridescent: 8.5 inch high quality Dressmaking Scissors with stainless steel knife edge blades and a matching zippered storage pouch. The included zippered pouch keeps your tools together, and the durable blades stay sharp for cutting metallic thread and fabric.

    Klasse Needles B4725 Scissor Set 3pc Iridescent

    Klasse Needles B4725 Scissor Set 3pc Iridescent

  • Thread Machine Earrings Set 2 ct Silver by The Quilt Spot: Set of 2 post earrings featuring one set of thread and one set of sewing machines, nickel free and hypoallergenic. A fun way to show off your sewing passion while you work on your scissor case project.

    Thread Machine Earrings Set 2 ct Silver by The Quilt Spot

    Thread Machine Earrings Set 2 ct Silver by The Quilt Spot