Quick Answer

The most effective upgrades for the Redcat Everest-10 focus on adding weight to the wheels, tuning the suspension, and upgrading the tires for better grip.

Why These Upgrades Matter

The Redcat Everest-10 is a capable RTR crawler, but its stock plastic wheels and lightweight tires can limit traction on steep or loose terrain. Simple, low-cost mods can dramatically improve its crawling ability without requiring a full rebuild.

What to Upgrade First

Start with the areas that give the biggest performance gain for the least effort: wheel weight, tire compound, and suspension tuning. These mods address the most common weaknesses out of the box.

Step-by-Step Upgrade Guide

  1. Add Wheel Weight: Install brass or aluminum wheel weights inside the front wheels. This lowers the center of gravity and improves front-end grip on climbs. Avoid adding too much weight to the rear, as it can cause the front to lift on steep inclines.
  2. Upgrade Tires and Foams: Replace the stock tires with a soft-compound crawler tire (e.g., Pro-Line or RC4WD). Use firm or dual-stage foams to reduce sidewall collapse on uneven surfaces. Softer tires grip better on rock but wear faster on pavement. Choose based on your primary terrain.
  3. Tune Suspension and Shocks: Adjust shock oil weight to 30-40wt for slower rebound, and add limiting straps or droop screws to reduce suspension droop. This keeps the chassis lower and more stable. Too much droop can cause the chassis to roll on side-hills. Test on a slope before hitting the trail.
  4. Install a Weighted Front Bumper: Add a metal front bumper or a servo-mounted weight. This shifts more mass forward, helping the front tires dig in on steep ascents. Make sure the added weight does not exceed the servo's torque rating or it may struggle to steer.
  5. Adjust Steering and Servo: Replace the stock servo saver with a solid aluminum horn and consider a metal-gear servo for more precise steering. Set the end points to avoid binding. A weak servo saver can cause sloppy steering on technical lines. Upgrade only if you notice wheel slip.

Product Facts

  • Redcat Everest-10 RC Crawler - 1:10 Brushed Electric Rock Crawler: The Redcat Everest-10 is a 1:10 scale brushed electric rock crawler that comes ready to run with a 2.4GHz radio, battery, and charger. This means you can focus your budget on performance upgrades instead of electronics, but the stock tires and suspension may need tuning for serious crawling.

    Redcat Everest-10 RC Crawler - 1:10 Brushed Electric Rock Crawler

    Redcat Everest-10 RC Crawler - 1:10 Brushed Electric Rock Crawler