Quick answer
Apply a generous layer of conductive gel to both the electrode and your skin before starting any electro play session. This ensures consistent contact and reduces the risk of uncomfortable hot spots.
Why conductive gel matters for electro play
Ordinary lubricants are not designed to conduct electricity. Conductive gel is formulated with water and salts that create a uniform electrical path between the electrode and your skin. Without it, the current can concentrate on small contact points, causing stinging or uneven sensations.
Choosing the right conductive gel
Look for a gel that is explicitly labeled for electrical stimulation. The Electrastim Conductive Gel is a reliable choice because it is compatible with the entire ElectraStim and SheStim range of accessories, ensuring safe and effective conductivity.
Step-by-step guide
- Prepare your skin and electrode: Clean the area of skin where you will place the electrode. Remove any oils, lotions, or sweat. Also clean the electrode surface with a mild soap and water, then dry it thoroughly. Dirty skin or electrodes can cause uneven conductivity and reduce the effectiveness of the gel.
- Apply a generous layer of conductive gel: Squeeze a dime-sized amount of gel onto the electrode or directly onto your skin. Spread it evenly with your fingers or a clean applicator. The gel should fully cover the contact area without gaps. A thin or patchy layer can create hot spots where the current concentrates, leading to discomfort.
- Attach the electrode and start at a low setting: Press the electrode firmly against the gel-coated skin. Turn on your estim device and start at the lowest power setting. Gradually increase intensity until you feel a comfortable sensation. Always start low and go slow. Your skin's sensitivity can vary, so never jump to a higher setting without testing first.
- Monitor sensation and reapply gel as needed: During your session, check that the gel hasn't dried out or shifted. If you feel any stinging or unevenness, pause, reapply gel, and adjust the electrode position before continuing. Dried-out gel loses conductivity and can cause discomfort. Reapply every 10-15 minutes or as needed.
- Clean up after play: After your session, remove the electrode and wipe off any remaining gel from your skin and the electrode with a damp cloth. Wash the electrode with mild soap and water, then dry it before storing. Leaving gel on electrodes can cause residue buildup and reduce their lifespan. Always clean them promptly.
Product facts
-
Electrastim Conductive Gel: The Electrastim Conductive Gel is truly conducive to all electrical stimulation and electric fetish roleplay scenes. This tube of Electro Conductive Gel will form an essential part of your electrical accessories collection. Using a dedicated conductive gel like this one ensures consistent conductivity and reduces the risk of uneven stimulation during electro play.
Electrastim Conductive Gel
