Quick Answer

Use AK Interactive's Decal Adapter Solution to soften and conform decals to any surface. Apply it after placing the decal, then gently brush to blend it into the model.

Why Decal Adapter Solution Works

Decal Adapter Solution is a liquid that softens decals, allowing them to conform to curved or textured surfaces without silvering. It is especially useful for complex areas like helmets, shoulder pads, or vehicle panels. Unlike a simple decal setting solution, this adapter solution helps the decal fully integrate with the surface, reducing the need for multiple products.

One trade-off is that the solution works best on painted and sealed surfaces. If you apply it over bare plastic or unpainted primer, the decal might not adhere as well. Always ensure your model is properly prepared before starting.

Step-by-Step Guide to Applying Decals with Adapter Solution

  1. Prepare the surface: Ensure the model is painted and sealed with a clear coat. This provides a smooth base for the decal to adhere to. A glossy finish works best; if your model is matte, consider a quick gloss coat first.
  2. Cut and soak the decal: Cut out the decal close to its edges, then soak it in warm water for about 10-15 seconds until it slides freely from the backing paper. Don't soak too long—over-soaking can cause the decal to curl or tear.
  3. Position the decal: Slide the decal onto the model using a damp brush or tweezers. Position it carefully before applying the solution. Once the decal touches the surface, it's harder to move, so take your time to get it right.
  4. Apply Decal Adapter Solution: Dip a brush in the solution and wet the decal thoroughly. Let it sit for a few minutes to soften. Don't brush too hard—let the solution do the work.
  5. Adapt the decal to the surface: Using a damp brush, gently press and roll the decal onto the surface, working out any air bubbles or wrinkles. The decal will conform to curves and details. If the decal doesn't settle, apply a bit more solution and wait another minute.
  6. Seal the decal: Once the decal is dry, apply a clear coat over it to protect it from scratches and weathering. Use a matte or satin varnish to match the rest of the model.

Product Facts

  • AK Interactive: Decal Adapter Solution (100ml Bottle): AK Interactive's Decal Adapter Solution comes in a 100ml bottle and is designed to adapt decals to any surface, no matter how complicated. This means you can confidently place decals on curved or textured areas without worrying about wrinkles or silvering, saving you time and frustration.

    AK Interactive: Decal Adapter Solution (100ml Bottle)

    AK Interactive: Decal Adapter Solution (100ml Bottle)