Quick answer

To use a tapping vibrator for clitoral stimulation, start with a low setting, apply lube, and position the raised mound directly against your clit. Gradually increase intensity and experiment with the textured rings for varied sensation.

Why a tapping vibrator works for clitoral play

Unlike standard vibrators that buzz in one spot, a tapping vibrator delivers percussive pulses that mimic a finger tapping motion. This can feel more targeted and less numbing over time, making it ideal for sensitive clitoral areas.

The TouchMe Tapping Vibrator features a raised mound that channels vibrations directly to the clit, with textured rings on the shaft for added stimulation. Its 9 vibration modes let you cycle from gentle caresses to rumbly pulsations.

Choosing the right setting

Start with a low, steady tapping pattern rather than a deep rumble. Tapping vibrators can feel intense quickly, so it's better to build up. The TouchMe offers 9 modes—begin with the first or second mode for a gentle introduction.

If you prefer broader stimulation, hold the vibrator against the labia rather than directly on the clit. The textured rings on the shaft can also be used externally on the inner thighs or nipples to warm up.

Step-by-step guide to using a tapping vibrator

  1. Prepare your body and toy: Apply a generous amount of water-based lubricant to your clit and the raised mound of the vibrator. This reduces friction and helps the tapping motion glide smoothly. Skipping lube can cause discomfort—always use enough to keep the area slick.
  2. Start with the lowest tapping mode: Turn on the vibrator and select the first or second vibration mode. Lightly press the raised mound against your clit, using circular or side-to-side movements to find the sweet spot. Don't press hard—let the tapping do the work. Too much pressure can dull sensation.
  3. Experiment with angles and speed: Tilt the vibrator to change where the mound contacts your clit. Try tapping on one side, then the other, or use the textured rings on the shaft for a different sensation. Cycle through the 9 modes to find your rhythm. If you feel numbness, switch to a lower mode or move the toy to a different area for a few seconds.
  4. Build intensity gradually: Once you're comfortable, increase the vibration speed or switch to a pattern with stronger taps. Use the tapping motion in short bursts—on for 10 seconds, off for 5—to build arousal without overstimulation. Overstimulation reduces pleasure; take breaks if you feel too sensitive.
  5. Clean and store properly: After use, wash the vibrator with warm water and mild soap or a dedicated toy cleaner. Dry thoroughly and store in a cool, dry place away from direct sunlight. Never submerge the handle if it's not fully waterproof—check the product manual first.

Product facts

  • TouchMe - Tapping Vibrator: TouchMe’s sleek design features a raised mound that channels vibrations directly to your clit, with textured rings on the shaft. The raised mound ensures tapping pulses hit exactly where you need them, while the rings add texture for extra sensation during clitoral play.

    TouchMe - Tapping Vibrator

    TouchMe - Tapping Vibrator