Quick answer
Using your Zojirushi Stainless Cool Bottle SD-KA series is straightforward: fill with your preferred beverage, close the lid securely, and drink from the attached cup. Proper cleaning and occasional replacement of the stopper ensure long-lasting performance.
Understanding your bottle's parts
The SD-KA series bottles come with a vacuum-insulated body that keeps drinks cold or hot for hours, a screw-on lid with a built-in stopper, and a separate cup that doubles as a drinking vessel. The stopper assembly includes a rubber gasket that can be replaced if it wears out.
Choosing the right capacity
The SD-KA series is available in four sizes: 20 oz. (0.60 L), 25 oz. (0.75 L), 34 oz. (1.0 L), and 41 oz. (1.2 L). Pick the size that matches how much liquid you need for your day—smaller for short outings, larger for long hikes or work shifts.
Step-by-step instructions
- Step 1: Fill the bottle: Remove the lid and fill the bottle with your cold or hot beverage. Leave about 1/2 inch of space at the top to allow for expansion and to ensure the lid seals properly. Do not fill with carbonated drinks or dairy products as they may leak or spoil. Avoid overfilling—leave a small gap for sealing.
- Step 2: Secure the lid: Screw the lid on tightly by turning it clockwise until it stops. You should hear a click or feel resistance. Check that the stopper is fully closed by pressing the drinking button—if liquid comes out, the lid isn't sealed. Always test the seal by pressing the button before carrying the bottle.
- Step 3: Drink from the cup: To pour, press the stopper button on the lid to open the spout, then tilt the bottle and pour into the attached cup. Alternatively, you can drink directly from the spout if you prefer. Close the stopper after each use to prevent spills. Pour into the cup to control flow and reduce the chance of spills.
- Step 4: Clean after each use: Wash the bottle, lid, and cup with warm soapy water and a soft sponge. Rinse thoroughly. Do not use abrasive cleaners or put the lid in the dishwasher—hand wash only to preserve the stopper and gasket. Allow all parts to air dry completely before reassembling. Hand wash the lid to keep the stopper sealing properly.
- Step 5: Replace the stopper when needed: If the lid starts to leak or becomes hard to open, the stopper assembly may need replacement. Order a genuine Zojirushi replacement stopper for your model. Remove the old stopper by unscrewing it from the lid, then screw in the new one. A worn stopper is the most common cause of leaks—replace it promptly.
Product facts
-
Stainless Cool Bottle SD-KA60H/75H/100H/120H: The Zojirushi Stainless Cool Bottle SD-KA60H/75H/100H/120H is offered in multiple capacities and colors so you can choose the size and look that suit your day. This means you can match the bottle to your daily hydration needs and personal style, from a compact 20 oz. for school to a 41 oz. for all-day hydration.
Stainless Cool Bottle SD-KA60H/75H/100H/120H
