Quick answer
Installing a LensCoat on your Canon 70-200 f/4 IS II takes about 10 minutes. Follow these steps to avoid misalignment and ensure full access to controls.
Why a LensCoat matters for your 70-200 f/4
The Canon 70-200 f/4 IS II is a workhorse lens for wildlife and event photography, but its smooth barrel is prone to scrapes and bumps that can hurt resale value. A LensCoat cover adds a protective layer that absorbs minor impacts and hides the lens shape from skittish subjects. The trade-off is that installation requires patience—rushing can block the AF/IS switches or distance scale.
How to install LensCoat on Canon 70-200 f/4 IS II
- Clean the lens barrel: Wipe the lens barrel with a microfiber cloth to remove dust, oil, or moisture. A clean surface helps the neoprene grip evenly and prevents bubbles. Skipping this step can cause the cover to slip or leave permanent marks under the neoprene.
- Align the cover with the control windows: Hold the LensCoat so the clear plastic windows line up with the AF/MF switch, IS switch, and distance scale. Start at the lens hood end and slide the cover over the barrel, smoothing it as you go. If the windows don't align perfectly, peel the cover off and reposition—forcing it will block controls.
- Seam closure and final adjustment: Press the seam along the bottom of the lens firmly to close the hook-and-loop strip. Run your fingers along the entire seam to ensure full contact. Rotate the zoom ring to confirm the cover doesn't bind. A loose seam can catch on gear bags or tripod collars. Check that the cover doesn't interfere with the zoom ring's smooth travel.
Product facts
-
LensCoat® Canon 70-200 f/4 IS II: LensCoat 70-200 telephoto lens cover offers your valuable equipment some protection from scrapes and bumps, preserving its resale value. It also helps break up the shape of your lens, making it less noticeable to wildlife. This cover not only guards against cosmetic damage but also improves your chances of getting closer to wildlife without spooking it.
LensCoat® Canon 70-200 f/4 IS II
-
LensCoat® Canon 70-200 f/4 IS II: The LensCoat 70-200 features clear plastic windows over the auto focus and Image Stabilization controls, and also the distance scale. You don't have to remove the cover to adjust settings or read markings—critical when you need to react quickly in the field.
