Why 180° points matter on the tabletop

Line of sight (LOS) arcs decide what a unit can see and shoot. Painting a clear 180° mark on each base removes guesswork and prevents mid-game arguments about facing. The Line of Sight Painting Templates - Points kit gives you a repeatable way to mark those arcs on 25mm, 40mm, and 55mm bases.

This guide covers assembly, painting, and a few practical tips to get clean edges without freehanding the arc.

Assemble the templates before you paint

The kit requires assembly. The catalog recommends wood glue (sold separately) for a strong bond. Work on a flat, protected surface and let the glue cure fully before using the templates on a base.

  1. Check the parts: Lay out the template pieces and confirm you have the sizes you need for your army (25mm, 40mm, 55mm).
  2. Glue the joints: Apply a thin bead of wood glue to the mating surfaces and press together. Wipe away excess glue immediately.
  3. Let it cure: Allow the recommended drying time for your wood glue before handling or painting. A cured joint keeps the template square and accurate.

Paint the arc: a simple sequence

Once assembled, the template is designed to be precisely measured for 180° points. The process is straightforward: place the template on the base, align it to the front arc, and apply paint along the edge. Because the template is measured, you get a consistent arc on every base, which is especially helpful when you are batch-painting a unit.

Work one base at a time and keep the template steady. If you are using a brush, load it lightly to avoid paint seeping under the template edge. For spray or airbrush, mask off the areas you want to keep clean.

What the catalog confirms

Miniature edge painting tips for cleaner results

  • Test on a spare base: Before committing to a full unit, try the template on a spare base to check alignment and paint flow.
  • Keep the template clean: Wipe paint off the template edge between bases so buildup does not distort the arc.
  • Use thin coats: Several thin layers give a crisper edge than one heavy coat, especially along the template line.
  • Mark both sides if needed: For units that can pivot, a matching arc on the opposite side can help, but the catalog only specifies 180° points.

When this template makes sense for your army

If you play games where facing and line of sight matter, consistent 180° marks speed up play and reduce confusion. The Line of Sight Painting Templates - Points is a low-cost accessory (catalog price USD 2.99, comparison price USD 4.99) that covers the three most common base sizes. It is made in the USA and requires assembly, so it suits hobbyists who do not mind a little prep work before painting.

If your bases fall outside 25mm, 40mm, or 55mm, this specific template will not fit them. In that case, you would need a different size or a freehand method. The catalog does not list other sizes for this product.

Product details at a glance