Quick Answer

To mount an Aimpoint Micro on a Blaser rifle, use a dedicated quick-release mount like the INNOMOUNT QD, attach it to the rifle's rail, and torque the screws to spec for a secure, repeatable zero.

Why a Dedicated Mount Matters

A dedicated mount ensures the optic sits at the correct height and aligns with the rifle's bore. Universal mounts may not fit Blaser's proprietary rail, leading to instability.

The INNOMOUNT QD is designed for Blaser and Sauer rifles, providing a secure interface that maintains zero even after repeated removals.

Compatibility and Limitations

The INNOMOUNT QD is compatible with Aimpoint Micro, Holosun, and GPO Spectra Dot sights, but not with larger tube red dots. Always confirm your optic's footprint before purchasing.

This mount does not include a red dot sight, so you'll need to source the optic separately.

Step-by-Step Mounting Process

  1. Prepare the rifle: Ensure the rifle is unloaded and the rail is clean and free of debris. Wipe the rail with a dry cloth to ensure a secure fit. A dirty rail can cause the mount to shift under recoil.
  2. Position the mount: Slide the INNOMOUNT QD onto the rifle's rail, positioning it at the desired eye relief. Align the mount's recoil lug with the rail slot if applicable. Ensure the mount is fully seated to avoid a loose fit.
  3. Attach the optic: Place your Aimpoint Micro onto the mount's interface, aligning the screw holes. Hand-tighten the screws evenly, then torque to the manufacturer's specification (typically 15-18 in-lbs). Over-tightening can strip threads; under-tightening can cause zero shift.
  4. Verify the fit: Gently push the mount to check for any movement. If it shifts, remove and re-seat the mount, ensuring the clamping mechanism engages fully. A solid fit is essential for maintaining zero.
  5. Test and zero: Take the rifle to the range and fire a few shots to confirm the optic holds zero. Re-tighten if necessary after the first session. Re-check torque after the first range session to account for settling.

  • Montage rapide Blaser - Sauer - Aimpoint Micro: The INNOMOUNT QD for Blaser - Sauer - Aimpoint Micro is compatible with Aimpoint Micro, Holosun, and GPO Spectra Dot sights. This ensures you can use a range of popular micro red dots with a single mount.

    Montage rapide Blaser - Sauer - Aimpoint Micro

    Montage rapide Blaser - Sauer - Aimpoint Micro