Quick answer

Apply a pea-sized amount of Pjur Infinity to yourself or your toy, spread it evenly, and reapply a small amount every 10–15 minutes or whenever you feel friction return. Because it is water-based, it absorbs and dries faster than silicone lubes, but its glycerin-free, paraben-free formula is compatible with all toys and gentle on sensitive skin. For longer sessions, keep the bottle within reach and add a few drops before you think you need them.

Why Pjur Infinity behaves differently from other water-based lubes

Pjur Infinity is made in Germany and free from preservatives, parabens, and glycerin. That matters because glycerin can leave a sticky residue and may irritate some people, while parabens and certain preservatives are common triggers for sensitivity. Without those ingredients, Pjur Infinity feels cleaner and is less likely to cause discomfort during extended use. It is also compatible with all toy materials, including silicone, so you do not have to worry about damaging your favorite vibrator. The trade-off is that water-based formulas evaporate; you will need to top up more often than with a silicone-based lube. Plan for that rather than fighting it.

How to apply Pjur Infinity for longer sessions

Start with clean hands and a clean toy. Squeeze a pea-sized amount onto your fingertips or directly onto the toy. Spread it along the shaft or the area you will be stimulating. For penetrative play, apply a little to yourself as well. If you are using a toy like the ILY Pebble, a small dot on the tip is enough to start. Begin slowly and add more lube as needed. The most common mistake is using too little at the start, which creates friction and defeats the purpose. Another mistake is applying lube to a toy that is already inserted; instead, withdraw, add a few drops, and reinsert. Keep a tissue nearby to wipe your fingers so you can grip the bottle easily. Reapply every 10–15 minutes, or sooner if you feel any drag. A little goes a long way, but do not be stingy. If you are switching between vaginal and anal play, use a new condom or clean the toy and apply fresh lube to avoid transferring bacteria.

Mistakes that make water-based lube dry out faster

Using a towel or rough fabric against the lubed area will wipe it away. So will leaving the bottle open, which allows water to evaporate. Store Pjur Infinity capped and upright, away from direct sunlight. Do not mix it with silicone-based lube unless you are using a condom, because the mixture can become gummy. If you are using a condom, check that your condom is compatible with water-based lube—most are, but oil-based products can weaken latex. Finally, do not apply lube to broken skin or inside the urethra. If you feel burning, stop and rinse with warm water. That is not a sign you need more lube; it is a sign something is wrong.

Step-by-step: applying Pjur Infinity for longer comfort

  1. Start with a clean base: Wash your hands and any toy with warm water and mild soap, then dry thoroughly. Bacteria and old lube residue can cause irritation or reduce the new lube's effectiveness. Checkpoint: if your toy feels tacky after washing, rinse again.
  2. Apply a pea-sized amount: Squeeze a small amount onto your fingers or the toy. Spread it evenly over the area that will be stimulated. For penetrative play, apply a little to yourself as well. Mistake to avoid: using too little at the start. It is easier to add more than to remove excess.
  3. Begin slowly and add as needed: Start with gentle movement. If you feel any friction or dragging, pause and add a few more drops. Do not push through discomfort. Checkpoint: friction means you need more lube, not more pressure.
  4. Reapply every 10–15 minutes: Water-based lubes absorb and evaporate. Keep the bottle nearby and add a small amount before you feel dry. For longer sessions, set a mental timer or ask your partner to remind you. Mistake to avoid: waiting until it is completely dry, which can cause micro-abrasions.
  5. Clean up and store properly: After use, wipe away excess lube with a damp cloth or rinse with warm water. Cap the bottle tightly and store it upright away from heat and sunlight. Next step: if you used a toy, wash it according to the manufacturer's instructions before storing.

Product facts

  • Pjur Infinity Water Based Lubricant: Pjur Infinity is a water-based lubricant made in Germany, free from preservatives, parabens, and glycerin, and compatible with all toys. The absence of glycerin and parabens reduces the risk of irritation and sticky residue, while toy compatibility means you can use it with silicone, TPE, and glass without damaging them.
  • ILY Pebble - NEW: The ILY Pebble is a small vibrator that can be used flat in your hand, nestled between bodies, or with pinpoint precision. Its compact size and versatility make it a good match for a water-based lube like Pjur Infinity because you can apply a small amount and reapply easily during use.