Quick answer
Installing a LensCoat on your Swarovski STS-65 HD is a straightforward process that adds scratch protection, breaks up the scope's outline for wildlife viewing, and makes handling more comfortable in extreme temperatures.
Why a cover matters for your STS-65 HD
The Swarovski STS-65 HD is a precision instrument built for demanding field use. A neoprene cover like the LensCoat absorbs minor scrapes and bumps that can otherwise mar the finish and reduce resale value. It also dulls the scope's reflective surface, making it less noticeable to wary animals.
Beyond protection, the neoprene acts as a thermal barrier. In cold weather the scope feels less icy to the touch, and in hot sun it stays cooler, making long glassing sessions more comfortable.
What to check before you start
The LensCoat for the Swarovski STS-65 HD is designed specifically for that model. Make sure you have the correct cover before opening the package. The cover is available in multiple color options, so choose one that suits your typical environment.
Work in a clean, dry area with good light. A table or flat surface works best. Have the scope and the cover ready, and avoid rushing the installation.
Step-by-step installation guide
- Prepare the scope and cover: Remove the scope from its tripod and set it on a clean, flat surface. Unfold the LensCoat and identify the front (objective) and rear (eyepiece) openings. The cover is shaped to match the STS-65 HD body, so the fit is not symmetrical. Common mistake: trying to force the cover on backward. Check the orientation before stretching the neoprene.
- Slide the cover over the eyepiece end: Start by feeding the eyepiece end of the scope into the smaller rear opening of the LensCoat. Work the neoprene slowly, pulling it evenly rather than yanking one side. The neoprene needs to stretch slightly for a snug fit. Checkpoint: if the cover catches on a ridge or focus knob, ease it past rather than pulling harder to avoid tearing the material.
- Align the objective opening: Once the cover is mostly on, align the larger front opening with the objective lens housing. The cover should sit flush against the scope body without bunching. Adjust by gently tugging the neoprene around the barrel. Common mistake: leaving wrinkles that block the focus ring or tripod mount. Smooth the material as you go.
- Secure the cover and check fit: Press the neoprene firmly against the scope body, especially around the objective and eyepiece rims. The cover should not slide freely. Verify that all controls (focus ring, diopter adjustment) remain accessible and unobstructed. Final check: mount the scope on the tripod and look through it. If the cover shifts during use, it may need to be repositioned or the fit checked against the model number.
Product details
-
LensCoat for the SWAROVSKI STS-65 HD: The LensCoat for the Swarovski STS-65 HD is made from neoprene and offers protection from scrapes and bumps, preserving resale value. It keeps your scope looking new longer and reduces the chance of damage that could affect optical alignment or weather sealing.
LensCoat for the SWAROVSKI STS-65 HD
