Quick Answer

Mount the Flex Cine Softbox to a Scrim Jim Cine frame (sold separately) using the heavy-duty touch fasteners, then attach the frame to your Flex 1' x 2' LED mat. The softbox collapses flat for storage and travel.

Why Use a Softbox with Your Flex LED Mat

A softbox like the Flex Cine Softbox (1' x 2') is designed to soften and direct the light from your Flex LED mat, reducing harsh shadows and creating a more flattering, even spread. The reflective silver interior maximizes light output, so you don't lose much intensity despite the diffusion.

The softbox attaches to a Scrim Jim Cine frame, not directly to the mat. That frame is sold separately, so factor that into your purchase. If you already own a Scrim Jim Cine frame, this softbox is a quick add-on. If not, the total cost may be higher than expected.

Step-by-Step Setup Guide

  1. 1. Prepare the Scrim Jim Cine Frame: Unfold the Scrim Jim Cine frame (1' x 2') and lock all corners. Ensure the frame is fully extended and stable before attaching the softbox. Common mistake: Forgetting to lock all corners can cause the frame to collapse during use.
  2. 2. Attach the Softbox to the Frame: Lay the Flex Cine Softbox flat with the reflective silver interior facing up. Center the Scrim Jim Cine frame on top, then press the heavy-duty touch fasteners around the perimeter to secure the softbox fabric to the frame. Make sure the fasteners are fully engaged along all edges to prevent light leaks.
  3. 3. Mount the Frame to the Flex LED Mat: Position the assembled softbox-and-frame unit in front of your Flex 1' x 2' LED mat. The softbox should sit flush against the mat's face. Use the frame's mounting hardware or additional touch fasteners (if provided) to secure the frame to the mat. Check that the mat is turned off during mounting to avoid accidental exposure to bright light.
  4. 4. Adjust and Test the Light: Power on the Flex LED mat and observe the light output. Adjust the softbox angle or distance from the subject as needed. The softbox softens the light, so you may need to increase the mat's brightness compared to bare operation. If the light is still too harsh, consider adding an extra diffusion layer inside the softbox.

Product Facts

  • Flex Cine Softbox (1' x 2'): For use with Flex 1' x 2' LED mats (including the original Flex and Flex Cine series). Collapses flat for effortless travel and storage. You can use the same softbox with both older and newer Flex mats, and it packs down flat without disassembly.

    Flex Cine Softbox (1' x 2')

    Flex Cine Softbox (1' x 2')