Quick answer

The Tactipup Army Green patch measures 2.75 x 2.75 inches and is designed to fit the chest plate or sides of the Extreme Harness, or the sides of the Stealth Harness. It is too large for any collar attachment.

Why patch size matters for harness fit

A patch that is too large can overhang the harness webbing, causing it to snag or peel off. The 2.75-inch size of the Tactipup Army Green patch is specifically chosen to match the standard chest and side panels of tactical harnesses, so it sits flush and secure without interfering with movement.

If your harness has narrower straps or smaller attachment zones, check the usable width before buying. The patch will not fit collars or harnesses with less than 2.75 inches of clear space.

How to attach the Army Green patch correctly

  1. Choose the right attachment zone: Identify the hook-and-loop panel on your harness. The Tactipup Army Green patch fits the chest plate or side panels of the Extreme Harness, and the side panels of the Stealth Harness. Do not attempt to attach it to collars or narrow straps. Common mistake: Trying to attach the patch to a 1-inch collar where it simply will not fit.
  2. Clean and dry the hook-and-loop surface: Make sure the loop surface on the harness is free of dirt, lint, and moisture. Press the patch firmly onto the surface, starting from one edge and smoothing outward to avoid air pockets. Checkpoint: A clean surface gives the strongest hold and prevents the patch from peeling off during active use.
  3. Test the hold before full use: After attaching, give the patch a gentle tug at each corner. If it lifts or shifts, press it down again. Once secure, the patch should stay in place even during running or climbing. Common mistake: Assuming the patch is secure without testing—loose patches can fall off and get lost outdoors.

About the Tactipup Army Green Patch

  • Tactipup Army Green Patch (2.75" x 2.75"): This rubber PVC patch is 2.75" x 2.75" and will fit on the chest plate or sides of our Extreme Harness or on the sides of the Stealth Harness. Knowing the exact dimensions ensures you choose the correct attachment point and avoid ordering a patch that won't fit your gear.

    Tactipup Army Green Patch (2.75" x 2.75")

    Tactipup Army Green Patch (2.75" x 2.75")