Quick answer
The Tentsile Stand lets you set up your Tentsile tree tent or giant hammock anywhere, even where no trees exist. Follow the modular assembly steps below, and always verify the stand is level and all connections are tight before suspending your tent.
Why use a stand instead of trees?
The Tentsile Stand is designed for locations where trees are unavailable, such as open fields, rooftops, or desert campsites. It eliminates the need to find a suitable pair of trees with the right spacing and diameter, giving you more flexibility in where you camp.
Because the stand breaks down into modular components, it's transportable, but keep in mind it's a substantial piece of gear. Plan for extra vehicle space and consider the weight when packing for a trip.
Compatibility with Tentsile products
The Tentsile Stand is engineered to hold Tentsile Tree Tents and Giant Hammocks. It is not designed for non-Tentsile hammocks or tents, so always use it with compatible Tentsile products to ensure safety and proper fit.
If you own a Tentsile product that isn't listed as compatible, contact Tentsile support before attempting to use it with the stand. The stand's weight and balance are tuned for specific models, and using an incompatible product could be unsafe.
Step-by-step setup guide
- Choose a flat, stable site: Select a level area free of debris and soft ground. The stand must sit evenly to distribute weight safely. Check that the ground is firm enough to support the stand's weight once loaded.
- Lay out all modular components: Unpack the stand and identify each part. Refer to the included manual to confirm you have all pieces before starting assembly. Missing parts will compromise safety—never improvise with non-Tentsile components.
- Assemble the base frame: Connect the base sections according to the manual, ensuring each joint locks securely. Tighten all bolts and pins as specified. A loose base can cause instability; double-check every connection before continuing.
- Erect the vertical supports: Attach the vertical poles to the base, making sure they are perpendicular and locked in place. Use a helper if needed to keep them steady. If a pole tilts, the stand may not balance correctly—adjust before proceeding.
- Attach the top crossbars: Mount the crossbars that will hold your tent's straps. Ensure they are evenly spaced and level. Uneven crossbars can cause your tent to hang at an angle, reducing comfort and safety.
- Secure the Tentsile product: Attach your Tentsile Tree Tent or Giant Hammock to the crossbars using the provided straps and buckles. Follow the manufacturer's instructions for your specific model. Test the tension by gently pulling on the tent before entering—if it shifts, re-secure the straps.
- Perform a final safety check: Inspect all connections, confirm the stand is level, and ensure the tent is evenly tensioned. Then load test with gradual weight. Never use the stand if any part shows signs of wear or damage—contact Tentsile support for guidance.
Product facts
-
Tentsile Tree Tent & Hammock Stand: The Tentsile Stand is the best way to set up Tentsile products without the need for trees. It is perfectly weighted and balanced to hold Tree Tents and Giant Hammocks, and it breaks down into modular component parts. This means you can camp in tree-less locations with confidence, but you'll need to allow time for assembly and ensure you have the space to transport the modular parts.
Tentsile Tree Tent & Hammock Stand
