Quick answer
Build the HG Aile Strike Revive by following a careful order: start with the core body, then attach the Aile pack, and finally add the weapons. Focus on cleaning nubs and test-fitting joints to avoid loose parts.
Why the order of assembly matters
The HG Aile Strike Revive is a high-grade kit with a separate Aile Striker pack that attaches to the back. If you build the pack first and then the body, you risk misaligning the connection pegs. Starting with the torso and legs gives you a stable base to test the pack fit later.
Common mistakes with the Aile pack
The Aile Striker pack has wing sections that can feel loose if not fully snapped together. Press each seam until you hear a click, and check that the connector bar sits flush against the backpack. Rushing this step often leads to wings that droop or fall off during posing.
Step-by-step build guide
- Prepare your tools and work area: Gather side cutters, a hobby knife, sanding sticks or file, and a cutting mat. Remove each part from the runner using side cutters, leaving a small nub, then trim flush with the knife. A clean nub removal prevents stress marks and ensures parts fit tightly.
- Build the torso and head first: Assemble the chest, waist, and head sub-assemblies. Pay attention to the polycap orientation in the torso—insert the ball joint for the waist before closing the chest halves. Test the head rotation before attaching the chin piece. If the head feels stuck, check that the neck peg is fully seated in the polycap.
- Assemble the arms and legs: Snap together the upper and lower arm halves, then insert the elbow polycap. For the legs, align the knee joint polycap with the notch inside the thigh. Attach the feet last to keep the leg assembly stable while working. Sand the peg on the shoulder joint slightly if it feels too tight—this prevents cracking the arm socket.
- Build the Aile Striker pack: Assemble the main thruster unit, then attach the wing sections. Ensure the wing connectors snap fully into the thruster body. Attach the pack to the backpack connector from step 2. Test the pack connection before gluing anything—if it wobbles, apply a thin layer of clear nail polish to the peg to thicken it.
- Attach weapons and final touches: Snap the beam rifle, shield, and two beam sabers into the hands and backpack. Pose the kit and check for any loose joints. Apply panel lining with a fine-tipped marker if desired, but let it dry fully before handling. If the shield arm clip is loose, use a small piece of tape on the clip to create friction.
Kit overview
-
Aile Strike Revive HG: The Aile Strike Revive HG is a high-grade model kit from the Gundam universe, offered under Thegundamgalaxy brand. It is a modernized version of the classic Aile Strike, with improved articulation and part separation for a cleaner build without painting.
Aile Strike Revive HG
