Quick answer
Use a high-quality wall anchor or picture-hanging hook rated for at least 5 pounds, and mark your drill points with a level to avoid unnecessary holes.
Why proper mounting matters
A wall clock like the Rancho Cucamonga Quakes 12" Tremor Clock is both a decorative piece and a functional item. Hanging it incorrectly can lead to scratches on the wall, a tilted clock, or even a fall that damages the clock or your floor.
The key is to match the hanging hardware to your wall type—drywall, plaster, or concrete—and to the clock's weight. The Tremor clock is lightweight enough for most standard anchors, but skipping the right hardware can still cause damage.
Step-by-step hanging guide
- Choose the right location: Select a spot on a stud if possible for the most secure hold. If not, use a wall anchor rated for at least 5 pounds. Avoid hanging near vents or doors where vibration could knock it off. Check for electrical wires or pipes behind the wall before drilling.
- Mark and level your drill points: Hold the clock against the wall and use a pencil to mark the top center or the hanging hole location. Use a level to ensure the mark is straight. A crooked clock is a common mistake that requires extra holes to fix. Use a laser level or a long bubble level for accuracy.
- Install the anchor or hook: Drill a pilot hole slightly smaller than your anchor, then tap the anchor in flush with the wall. Screw in a picture-hanging hook or a screw until snug. For drywall, toggle bolts provide extra holding power without damaging the surface. Do not overtighten—this can crack the drywall or strip the anchor.
- Hang the clock and check alignment: Place the clock's hanging slot or keyhole over the hook or screw. Gently release and check that it hangs straight. If it tilts, adjust the hook slightly or add a small adhesive pad to level it. Wait 24 hours before adjusting to let any adhesive cure.
Product details
-
Rancho Cucamonga Quakes 12" Tremor Clock: Our 12" Chrome plated Tremor clock is both a retro classic, and a trendy find for a wall clock. Stunning graphics with a metal hands make a great fit in any fan cave, office, bar, or bedroom. Its lightweight construction and metal hands mean you don't need heavy-duty anchors, but a secure mount ensures it stays level and safe.
Rancho Cucamonga Quakes 12" Tremor Clock
