Quick answer
Assembling the Harlequin Kids Storage Bench takes about 30 minutes with basic tools. Follow the step-by-step process below to ensure a sturdy, safe bench for your child's room.
Before you start: tools and preparation
You will need a Phillips head screwdriver and a soft cloth to protect the painted finish. The bench uses hidden screws and a smooth closure mechanism, so take care not to overtighten any fasteners.
Work on a clean, flat surface like a carpet or a padded mat to avoid scratching the white lacquered surface. The Harlequin design features a rhombus pattern that is delicate; handle the panels gently.
Common assembly challenges
The storage lid uses a smooth closure hinge that requires precise alignment. If the lid does not close evenly, loosen the hinge screws slightly, adjust the lid, and retighten.
The rhombus pattern panels are symmetrical but not identical on both sides. Double-check the orientation before inserting screws to avoid mismatched alignment.
Assembly steps
- Attach the side panels: Place the back panel face down on a soft surface. Align the left and right side panels so the pre-drilled holes match. Insert the provided screws and tighten with a screwdriver. Do not fully tighten until all panels are joined. Common mistake: over-tightening early can warp the panels. Leave screws slightly loose until the frame is square.
- Secure the front panel and base: Attach the front panel to the side panels using the remaining screws. Then slide the base panel into the grooves at the bottom. Secure it with screws from underneath. Check that the base sits flush with all four sides before tightening. An uneven base can cause the bench to wobble.
- Install the storage lid hinge: Position the lid on top of the bench frame. Align the hinge brackets with the pre-drilled holes on the back panel. Insert and tighten the hinge screws. Test the lid movement; it should close slowly without resistance. If the lid does not close smoothly, loosen the hinge screws slightly, adjust the lid position, and retighten. Do not force the lid closed.
- Final safety check: Stand the bench upright on a level floor. Gently shake the bench to ensure all joints are tight. Check that the lid opens and closes freely without pinching. Wipe any fingerprints with a dry cloth. Periodically recheck the screws after a few weeks of use, as wood can settle and loosen fasteners slightly.
Product details
-
Harlequin Kids Storage Bench - White: The seat has a smooth closure, ensuring that the lid closes softly without slamming. This prevents pinched fingers and makes the bench safer for young children to use independently.
Harlequin Kids Storage Bench - White
