Quick answer

Clean your latex lingerie by rinsing it in lukewarm water, gently washing with a dedicated latex cleaner, rinsing again, and drying away from direct heat.

Why use a dedicated latex cleaner?

Standard soaps and detergents often contain oils, fragrances, or additives that can degrade latex over time or leave a residue that dulls the shine. A dedicated latex cleaner, like Skin Two Latex Cleaner, is formulated to be odour-free and leave the material in a neutral state, so it stays supple and ready to wear. This also prevents any chemical reaction that could cause discolouration or stickiness.

If you plan to wear your latex in sunlight, consider a UV protector spray such as BeGloss Perfect Shine & UV Protector. It helps shield the material from UV radiation that can cause fading and brittleness, especially during outdoor events or photoshoots.

Common mistakes that damage latex

Using hot water is a frequent error. Hot water can cause latex to lose its elasticity or become sticky. Always stick to lukewarm or cool water.

Another mistake is wringing or twisting the garment to remove water. This can create tears or permanent creases. Instead, gently press the water out with a soft towel.

Avoid storing latex while it is still damp. Moisture trapped in a sealed bag encourages mould and mildew, which ruin the material.

Step-by-step latex lingerie cleaning routine

  1. Rinse with lukewarm water: Hold your latex lingerie under a gentle stream of lukewarm (not hot) water to remove surface dust and sweat. Turn the garment inside out to clean the side that contacts your skin. Avoid hot water — it can make latex sticky or lose shape.
  2. Apply a dedicated latex cleaner: Dispense a small amount of Skin Two Latex Cleaner onto a soft sponge or cloth. Gently wipe the entire surface of the latex, focusing on areas that touched skin. Do not scrub aggressively. Never use dish soap, body wash, or alcohol-based cleaners — they can degrade the latex.
  3. Rinse thoroughly again: Rinse the garment under lukewarm water until all cleaner is removed. Residual cleaner can cause tackiness or attract dust. Check that the water runs clear before moving on. Incomplete rinsing is a common cause of sticky latex.
  4. Pat dry with a lint-free towel: Lay the latex flat on a clean, lint-free towel. Gently press another towel on top to absorb moisture. Do not wring, twist, or hang the garment — the weight of water can stretch it. Wringing can cause permanent creases or tears.
  5. Air dry away from heat and sunlight: Place the latex on a drying rack or clean towel in a cool, shaded area. Let it air dry completely before storing. Direct sunlight or radiators can cause fading and brittleness. If you need UV protection, apply BeGloss Perfect Shine & UV Protector after drying.
  6. Store flat or hung loosely: Once fully dry, store your latex lingerie flat in a sealed plastic bag or hung on a padded hanger. Avoid folding or creasing for long periods. Keep away from sharp objects and other materials that might transfer colour. Never store latex with metal zippers or rough fabrics — they can snag or stain.

  • Skin Two Latex Cleaner 250ml: Skin Two Latex Cleaner is odour free and leaves latex in a neutral state. This ensures no residue or fragrance remains, so your lingerie stays comfortable against the skin and maintains its natural shine.

    Skin Two Latex Cleaner 250ml

    Skin Two Latex Cleaner 250ml

  • BeGloss Perfect Shine & UV Protector 100ml: BeGloss Perfect Shine & UV Protector protects latex against UV radiation. If you wear your latex in sunlight, this spray prevents UV damage that can cause fading and brittleness, extending the life of your garment.

    BeGloss Perfect Shine & UV Protector 100ml

    BeGloss Perfect Shine & UV Protector 100ml