Quick answer
To fit a Cam Cam Copenhagen changing cushion cover, start by locating the elastic casing, then slide the cover over the cushion from one end, smoothing out wrinkles as you go. The coated inner surface repels water and dirt, making it easy to clean.
Why a proper fit matters
A snug cover stays in place during diaper changes and prevents bunching that could create uneven surfaces. The elastic casing on Cam Cam Copenhagen covers is designed for a secure hold, but rushing the process can leave gaps or wrinkles.
What you need
You only need your changing cushion and the cover itself. No tools or extra fasteners required. The cover’s coated surface resists water and dirt, so even if you accidentally touch a dirty area during fitting, a quick wipe cleans it.
Step-by-step fitting guide
- Step 1: Lay the cover flat: Place the cover on a clean, flat surface with the elastic casing facing up. Identify the opening – it runs along one of the longer edges. Check that the cover is not twisted before you start.
- Step 2: Insert the cushion corner: Hold the cushion with one hand and guide one corner into the cover opening. Push the corner all the way to the opposite end of the cover. A common mistake is pushing only halfway – ensure the corner reaches the far seam.
- Step 3: Work the cover over the cushion: Using both hands, gradually pull the cover over the cushion, moving from the inserted corner to the opposite side. Smooth the fabric as you go to avoid wrinkles. If the cover feels tight, don’t force it – gently stretch the elastic casing with your fingers.
- Step 4: Center and adjust: Once the cover is fully on, center the cushion inside the cover. Run your hands over the top surface to check for any remaining wrinkles or misalignment. A wrinkled cover can be smoothed by lifting the cushion and tugging the cover gently from the underside.
- Step 5: Secure the elastic casing: Tuck any excess fabric under the cushion so the elastic casing sits flush against the bottom. The cover should feel taut but not stretched. If the casing rolls up, flip the cushion over and adjust the fabric evenly around the edges.
Product facts
-
Changing Cushion Cover - OCS - Rowan: The Changing Cushion Cover - OCS - Rowan features an elastic casing for a snug fit and a coated surface that repels water and dirt. This means you can fit it quickly without struggling with ties or buttons, and any spills during fitting wipe off instantly.
Changing Cushion Cover - OCS - Rowan
